R80 TC

SMOK RTC 80W Box Mod
IT Does
as we all want!
Red
Black
Silver
Price: $59
Order Now

RTC, the 80W TC mod is an upgraded version of the previous M80 Plus. Featuring improved temperature control technology, it has more accurate and intelligent temperature control capability for only need to adjust the temperature value, the wattage will be automatically controlled. Along with using an innovative chip, RTC can output a straight voltage and thus enhancing the consistency and taste of every puff. It takes internal battery with 4000 mAh large battery capacity, which should be charged through the USB port. RTC is designed to offer everything you need to maximize your vaping experience.

Superior performance,Safer to vape,Stylish Design.R80 TC can support temperature control with Stainless Steel/Nickel 200/Titanium, and supply power of up to 80 watts, let you feel high with superior performance. With brand new internal battery monitoring technology, the perfect battery system could be the guardian of your vaping safety.

Rubberized Finish in 4 Eye Catching Colors, there is always one for you. In addition to its portable and compact size, R80 TC has a fundamentally improvement in finish. The new rubberized finish adds a shiny look and soft feel, and is more durable than an oxidized one. What's more, it provides five eye catching colors for you to choose.

PERFORMANCE
Feel High with Superior Performance

Temperature Control & 80W Maximum Output.R80 TC can fully support temperature control with Stainless Steel/Nickel 200/Titanium, and offer an adjustable TCR (Temperature Coeffcient of Resistance) setting respectively to meet different customers demand. It puts out up to 80W, and fires atomizers between 0.06Ω and 2Ω (TC Mode).

SAFETY
4000 mAh Internal Battery & Battery Monitoring System

Safer to Vape, You Could Hardly Put it Down: Internal battery with 4000 mAh large capacity and Micro USB charging make that possible - you could hardly put it down. Safety, safety and safety, it's certain to be guaranteed with technology: R80 TC use a stable DC circuit to monitor battery with high effciency and safety, and multiple protections like 12 seconds cut-off, low or high battery warning, short-circuit protection, over-heating protection, etc.

STRUCTURAL DESIGN

R80 TC is designed with style and function to provide you a more comfortable and ergonomic vaping experience.

SPECIFICATIONS

ADJUSTABLE INITIAL RESISTANCE

As temperature sensing coils tend to be sub-ohm, the poor contact problem can make a big error, in a way that is not evident when an atomizer is being used for wattage control only. This function is designed to ensure your resistance on the load remains the same. And its adjustable range is ±50 mΩ (± 0.05Ω).

SS/NI200/TI WIRE SUPPORT

R80 TC can support temperature control with Stainless Steel wire as well as Nickel 200 & Titanium, and allow you to adjust their TCR (Temperature Coefficient of Resistance) in different ranges for further improving the accuracy of temperature control and bring you the best taste.

PUFF COUNTER

The puff counter will record the numbers of puffs you have already taken, and also allow you to set daily puff numbers.

Multiple Protections

R80 TC provides multiple types of protections to safe guard against potential risk.

SILICONE MOD CASE PROTECTS YOUR R80 TC

Silicone Mod Case can effectively protect your R80 TC from accidental bumps.

The case is not included in the kit by default. Please contact your vendor to buy that. Hope you all love it.

Treebox

SMOK Treebox TC75W Box Mod

Treebox is the latest Temperature Control Box Mod released by SMOK, features real Brazilian zebrawood for the whole body adds to its natural beauty.TREEBOX is design with style, ease of use in mind without sacrificing performance.
Wood
Price: $64.99
Order Now

Treebox is the latest Temperature Control Box Mod released by SMOK, features real Brazilian zebrawood for the whole body adds to its natural beauty.TREEBOX is design with style, ease of use in mind without sacrificing performance. High-quality OLED display is easy to read. Bottom of the box are full of venting holes to prevent the mod from overheating. The Treebox takes a replaceable 18650 battery and the magnetic battery cover can easily slide off. Featuring 75 watts of maximum output, and along with High-Frequency Dynamic Monitoring Resistance Technology and the adjustable initial resistance function, TREEBOX is a remarkable box mod.

Where innovation meets style

Treebox features real zebrawood for the whole body and superb artisanship! The craftsmanship fully shows the actual color and texture of wood and adds to its natural beauty. From the selection of the finest log up until the exquisite end product, the Treebox is designed to stand the test of time and trend.

Treebox is highly desired for its aesthetic appearance and powerful performance!

Integrated with the sophisticated Dual Driver Output Mode which has able to fire atomizers with a resistance down to 0.06 ohm and supply power of up to 75 watts. And with High-Frequency Dynamic Monitoring Resistance Technology, the Treebox can detect atomizer resistance once every 250 microseconds, with a precision of approximately 4000 times per second, thus regulating the temperature of heating coil more accurately.

The spring-loaded center pin is self-adjusting to your use of atomizers. The Treebox takes a replaceable 18650 battery and the magnetic battery side cover can easily slide off when you replace the battery.

This is Treebox, where technological innovation meets natural style!

100% BRAZILIAN ZEBRAWOOD

Featuring fine texture, shiny color and smooth surface,Brazilian zebrawood fully shows its natural beauty and adds to a comfortable feel, This wood is rated as very durable, mainly used in fine furniture.

Notice: For using 100% natural wood, we can't guarantee the wood grains of all products are same.
Thanks for your kindly understanding.

Nine layers of amber paint technique

From cut a log into boards to smoothen the surface and paint nine layers amber finish, we finally made the Treebox wiht attractive color and grain patterns, which just looks like real amber.

75 Watts of Maximum Power

Treebox can provide 75 watts of maximum power, is perfect for those who like higher resistance and cooler vape.

Specifications

Size: 92mm*40mm*28mm
Weight:80g
Material:Zebrawood
Output Power:1W-75W
Resistance Range: 0.06Ω - 2.00Ω （TC）
                  0.10Ω - 3.00Ω  (WC)
Output Voltage:0.8V-9.00V
Standby Current: < 20ua

Dual Driver Output Mode

The most updated treebox software support 3 kind of heating wire materials such as stainless steel, titanium and nickel 200.

PCB protection and button durability

PCB board covered by unique panel to protect the electronic components, which can effectively prolong its longevity.And each button is pressed more than 100,000 times.

Adjustable initial resistance

Adjustable Initial Resistance, a new feature added to the Treebox, is designed to ensure your resistance on the load remains the same,Noticing the initial resistance of your atomizer is an important requirement for the temperature - control mods.As temperature sensing coils tend to be sub-ohm, the poor contact problem can make a big error, in a way that is not evident when an atomier is being used for wattage control only. A 0.01Ω measurement error will lead to about 10℃ different, however, we have all known that a 0.02Ω error can be a common occurrence by simply screw the atomizer tighter or looser.

So Treebox developed this new feature, in order to help temperature control fans to adjust the initial resistance when an error occurred.And its adjustable range is ±50 mΩ(± 0.05Ω).
Hope our Adjustable Initial Resistance Feature will further enchance your vaping experience.

Improved Temperature Control Design

Most temperature-control mods on the market need to set wattages while applying temperature protection, which is inconvenient, While Treebox has improved the design that can automatically adjust wattages according to the temperature value you set, which make the operation more simple easy.

Temperature protection between 200℉ and 600℉ (or 100℃ - 315℃)

1. Under temp mode, Treebox can recognize your coils made of Nickel 200 and Titanium.
2. Be Careful to only attach new atomizers that have cooled to room temperature to the mod.
3. When using a new atomizer or reconnect your existing atomizer under temp mode, the Treebox will prompt"New Coil Up Same down" to allow you to confirm the change.

Special Temperature Control

Dual Driver Output Mode
Rencently, most devices on the market have "single driver system", which means that it's only one option, either boost or buch the voltage. However, Treebox has integrated our own Dual Driver Output Mode that works to buch and boost the voltage to improve the accuracy and speed of regulating, and enhance the consistency and taste of every puff.

High-Frequency Dynamic Monitoring Resistance Technolgy

HFDMR,is a high-frequency resistance sensing technology, which can detect atomizer resistance once every 250 microseconds, with a prcision of approximately 4000 times per second, thus regulating the temperature of heating coil more accurately.

Self-adjusting center pin

The spring-loaded center pin is self-adjusting to your use of atomziers.

Easy Slid Magnetic battery side cover

Oh,no! Don't tell me you are still using screwdriver to replace battery, That sucks,doesn't it? Now Treebox takes magnet-held battery side Cover. You can simply slide it off and replace battery without tools.

OLED display

It presents all key pieces of information, including ouput wattage, output voltage, atomizer resistance and remaining battery life,etc.

Reliable Protechtions

Intelligent Atomizer Recognition
Puff Monitoring System
12 Seconds Cut-off
Short Circuit Protection
Over-heating Protecion
Low-Battery Warning

Kanger KBOX MOD 200W

Kanger KBOX 200W Temperature Control Variable Wattage Box Mod

Red
Black
White
Price:$43 $70
Order Now

A new vape mod by Kanger. This is the upgraged version of the Kanger Kbox. It is 200w mod with temperature control function.
Product Description:

Kanger Kbox 200w box mod features temperature control technology and powered by two 18650 batteries. Under TC function, it supports Nickel, Titanium, Stainless Steel and Nichrome wire. It supports 7-200W wattage and 0.05ohm coil. The OLED screen display the information of device, you also able to upgrade function through USB.

Parameter:

Size	H(84mm) x L(56mm) x W(22mm)
Temperature Control Supports	Ni/Ti/SS/NiCr
Resistance	0.05ohm and above
Smallest Size:	200W/120W
Wattage Output Range:	7-200W/7-120W
Battery Type	2* 18650 batteries (not include)
Color:	Red,Black, White
Thread Type	510

Characteristic:

1. Temperature control function supporting the Nickel, Titanium, Stainless steel and Nichrome wire.
2. Support 0.05 ohm coil.
3. Temperature regulation of 1000 times per second makes the taste much softer.
4. 360kHz high speed synchronous DC-DC control mode, ultra low output ripple, maximum efficiency is more than 97%.
5. Smart identification and balancing battery charging, matching any model of adapter from 300mA to 2A, the maximum battery charging current is up to 1.8A.
6. PCB with unique serical number of global anti-counterfeiting,guarantee quality
7. Ultra low quiescent current, under the state of quiescence much reduce stand by power dissipate.
8. Safety protection include: High temperature, reverse, short circuit, low voltage, battery charging and discharge protection of single cell.
9. Adopting large number of TI Infineon and other high stability performance chips from the United States.
10. With USB upgrade function.

If you like it , Order now, promise 100% authentic with perfect after-sales service, you can have a good vaping expirence with it!

eVic-VT

Joyetech eVic-VT TC60W 5000mAh VW Battery Mod

eVic-VT Visual Display: VT-Ti mode/VT-Ni mode/VW | Wattages/ Voltages| Atomizer Resistance| Battery power/Puff/Time
Dazzling White
Racing Yellow
Cool Black
Price: $84.9  $129.9
Order Now

Presenting the eVic-VT 60W, its new cutting edge technology of temperature control, embodying the concept of a healthy alternative lifestyle. eVic-VT features a super large OLED screen, supporting VT-Ti (Titanium)/ VT-Ni (Nickel)/ VW mode, and battery capacity of 5000mah. The Variable Temperature (VT) brings out a different flavor experience with the change of temperature settings, not only improving the taste,but also saving battery and liquid consumption. eVic-VT is not your typical vape, it's an evolutionary start.

Parameter:

Size:	47*25.5*85.6mm
Color:	Dazzling White, Racing Yellow, Cool Black
Capacity:	5000mAh
Output mode:	VT-Ti/VT-Ni/VW Mode
Temperature Range:	100-315℃/200-600˚F
Output Wattage:	1W-60W (VT Mode/VW Mode)
Output Voltage:	0.5V-8.0V
Resistance Range:	0.05-1.0ohm for VT mode | 0.15-3.5ohm for VW mode
eVic-VT Visual Display:	VT-Ti mode/VT-Ni mode/VW | Wattages/ Voltages | Atomizer Resistance | Battery power/Puff/Time

Features

Fashionable and Amazing Outlook

Streamlined Sports Car Design

Large OLED Screen

Multi-hole for Ventilate

Lateral Charging Port

Applied with the Most Advanced Intelligent Temperature Control System

The Variable Temperature (VT) system provides an almost perfect vaping experience with various e-juice through temperature control system, and at the same time, it decreases e-juice consumption.

Also, it is economical in battery consumption. When vaping, the wattage will reach to maximum in no time and the device can easily sustain in high temperature but with much lower wattage.

Control Both Nickel 200(Ni) and Titanium (Ti) Heating Wire

Nickel 200 (Ni,Made in USA) and Titanium (Ti) wires, applied with eGo ONE Mega atomizer, greatly enhance the performance of eVic-VT.We have multiplex of choices of VT atomizer heads to go with eGo ONE atomizer, Delta Ⅱ atomizer and all other VT atomizers.

Traditional Advantage of VW function

In VW mode output wattage can be adjusted from 1W to 60W by turning the control knob, right to increase, and left to decrease. Holding the control knob to the right or left will make the wattage setting rapidly increase or decrease.
Note:
For Kanthal wire with resistance range 0.25-1.0 ohm, the maximum output wattage on screen is 60W.
For Kanthal Wire with resistance range 0.15-0.24 ohm, the actual maximum output wattage will be limited to be 50-55W to ensure safer operation.

Joyetech's Unique Vaping Record System

eVic-VT can record your vapor Time and Puff automatically. In Time or Puff mode (flashing), long press the fire button to eliminate records of each.

iJust 2 (TC) Atomizer

Eleaf iJust 2 (TC) Atomizer

iJust 2 atomizer features 5.5ml huge liquid capacity despite its light weight. By adopting dual coil EC head, it can handle up to 80W and make large cloud production. The special structure design for iJust 2 atomizer standard base improves the heat dissipation capacity to a large extent. Newly added TC version.

Prcice: $16.9(TC) $27.9   $14.99 (without)
 

Order Now

Product Introduction:

iJust 2 atomizer features 5.5ml huge liquid capacity despite its light weight.
With dual coil EC head of 0.3ohm, it can handle up to 80W and make large cloud production; when using EC TC head of pure cotton wick, it is compatible with various temperature control batteries and can be used within a wide range of wattage from 30W to 60W.
The special structure design for iJust 2 atomizer standard base also improves the heat dissipation capacity to a large extent.

Parameter:

Length: 67.5mm
Diameter: 22.0mm
Capacity: 5.5ml
Color: Silver
Thread Type: 510 thread
Material: Stainless steel

Standard configuration:

iJust 2 atomizer:

1×iJust 2 Mouthpiece
1×iJust 2 Atomizer Tube
1×EC Head(0.3ohm)
1×iJust 2 Atomizer Standard Base
1×iJust 2 Airflow Control Ring
1×User Manual

iJust 2 TC atomizer:

1×iJust 2 Mouthpiece
1×iJust 2 Atomizer Tube
2×EC TC Head(0.15ohm)
1×iJust 2 Atomizer Standard Base
1×iJust 2 Airflow Control Ring
1×User Manual

Features:

1. EC head is adopted in iJust 2 atomizer, which is consisted of two heating coils vertically placed in parallel. It enables a large amount of cloud production;
2. EC TC head adopted in iJust 2 TC atomizer makes the atomizer compatible with various temperature control batteries.
3. The capacity of the atomizer tube reaches 5.5ml, which reduces frequency of refiling e-liquid and therefore becomes more convenient.
4. The special structure design for the iJust 2 atomizer standard base improves the heat dissipation capacity to a large extend.
5. The amount of airflow can be adjusted by rotating the airflow control ring on iJust 2 atomizer standard base so as to get different vaping experiences.
6. Pure organic cotton wick: 100% organic cotton is used as the wick of atomizer head in order to produce a pure flavor.
7. There is another four-hole atomizer base and EC 0.5ohm head sold as spares for your option.

How to add liquid:

First unscrew iJust 2 atomizer base off the atomizer. Then slowly refill e-liquid into the hole along the tube. At last, screw iJust 2 atomizer base onto the atomizer.

Note:

a) Please do not add liquid into the air pipe and don't overfill;
b) Please first drip a few drops of e-liquid directly into the cotton wick so as to make it fully moist before vaping;
c) Please don't vape until e-liquid nearly runs out. Otherwise, the cotton wick inside will be damaged.

Melo Atomizer

Eleaf MELO Atomizer
For all Eleaf fans, the Eleaf MELO atomizer was designed for the new iStick 30 watts battery or any other high wattage batteries. It is constructed out of stainless steel, along with its glass tube body and glass mouthpiece.

Price: $19.60  $29.90

Order Now

The cotton used inside is safe and certificated. The coil is sub ohm at 0.5 ohm to produce a smooth vape.

Specifications:

Diameter: 22.3mm
Length: 67.3mm
Capacity: 3.5ml
Color: silver
Working wattage: 20W-30W
Thread Type: 510
Resistance: 0.5ohm 

Features

1. Enhanced Heating Wire:

The 0.5ohm heating coil produces a huge vapor due to the thickened 0.4mm diameter, which also guarantees a durable and safer output of 20-30 wattage.  

2. Newly Introduced Wick:

The wick used inside is organic cotton, known as a more environmental and healthier material.

3. Improved Air Inflow Control:

With six inlet holes on the MELO base, the airflow is more unimpeded. One can enjoy the smooth and constant vapor by easily rotating the regulation ring.

4. Thread Connection of Atomizer Head:

The threads at each side of the MELO head enables you to connect the MELO base and tube tightly, and ensures an efficient and stable output. 

How to Add Liquid:

1. Screw the base off atomizer.
2. Slowly refill the liquid into the space around the air pipe. Pay attention not to over fill, leave a small air pocket in order to avoid leakage.
Note: Please make sure the atomizer head is always tightened up.

How to Replace Atomizer Head:

1. Screw the base off atomizer.
2. Screw off the atomizer head from base and replace a new one.

Recommended Use: MELO Atomzier + iStick 30W

The Eleaf Melo atomizer is best matched with the iStick 30W Battery and also works for the the iStick 50W Battery. You can enjoy better vapor from this combination.      

Lemo 2 Atomizer

Newly Attached Temperature Control Heating Wire
1. Side E-liquid Fill Hole
2.PEEK Used as Insulating Material
3.Adjustable Airflow
4.Organic Cotton Wick
5.Larger Diameter of Mouthpiece
6. Temperature Control Nickel 200 Heating Wire
Price: $34.6  $49.9

Order Now

Specifications:

Length: 76.2mm
Diameter: 22mm
Liquid Capacity: 3.8ml
Rated Resistance Range: ≥0.3Ω

(Default configurations: )
Resistance of the Pre-made Coil: 0.5Ω
Diameter of the coil: 0.5mm

Temperature Control Nickel 200 heating wire is added
The Lemo 2 is the advance version of the well-known Lemo series atomizers due to its new innovative design of a side e-liquid fill hole and the use of PEEK(the well-known high heat and corrosion resistance material) of insulating piece. Vaping becomes safer and more stable, and no more needs of detaching the atomizer during refilling. The fill process becomes easier and leakage can be avoided. The inheritance of RBA head also maximizes the fun of DIY experience and could bring cloud vapor production for you.
Features

1. Side E-liquid Fill Hole:

One can easily refill liquid into atomizer tube through the side e-liquid fill hole without detaching the components which is more convenient and can avoid leakage.  

2. PEEK Used as Insulating Material:

PEEK(poly ether ether ketone)——a kind of special polymer material which is famous for the high heat and corrosion resistance. We use PEEK as the material of insulating piece inside RBA head so as to provide a safer and more stable vapor for customers. 

3. Adjustable Airflow:

The air-inlet hole on Lemo 2 is enlarged compare to the previous version. In this case, huger vapor could be enjoyed while the device will not be too hot. One can easily rotate the regulation cover to adjust the airflow, the more the slot is covered, the less the airflow is. 

4. Organic Cotton Wick:

Pure organic cotton is used as the wick of RBA head, people could enjoy a more pure flavor when vaping. 

5. Larger Diameter of Mouthpiece:

Cloud vapor production is easily produced by Lemo 2 and the extended size of mouthpiece could make the inhale more comfortable. 

How to Add Liquid:

1. Rotate the side e-liquid fill hole cover counter-clockwise to expose the fill hole and then slowly refill the e-liquid into glass tube.
2. After the liquid is filled, rotate the side e-liquid fill hole cover clockwise to close the fill hole.

Tips: Parallelize the atomizer and then refill it. In this case, more liquid could be injected into the tank. 

Note:
1.Air-inlet hole should be closed during refilling process.
2.Make sure the e-liquid level is between 10%-90% and leave a small air pocket in order to avoid leakage.
3.Do not put the syringe needle directly into liquid in the tank during refilling, or it may lead to leakage.       Recommended Battery: iStick Battery

The Lemo 2 atomizer is specially designed for the iStick Battery( 30W, TC40W, 50W, TC60W, 100W). You can enjoy a better vapor from this combination.

Aspire Odyssey Kit

Aspire Odyssey Kit with Triton Tank and Pegasus MOD
Temperature Control,Variable Wattage/Voltage,Top-Filling E-Liquid System
Brushed Slate
Brushed Brass
Brushed Chrome
Price: $96.9 134.9

Order Now

Product description

If you're wanting the perfect starter kit, you'll be thrilled with the Aspire Odyssey Kit. This all new kit is the workings of the team over at Aspire, which consists of Aspire's all new Pegasus Box Mod and their highly innovative Aspire Triton Tank. This remarkable combination of popular vaping products will deliver an incredible vaping experience and will work seamlessly with one another, as they both deliver a slew of outstanding features.

The pair have been placed together since they both offer exceptionally high quality, impressive durability and stellar performance. The first time you place your hands onto this setup, you'll feel your hands easily mold to the smooth, brush finished body. Actually using it delivers a whole new thrilling experience.

Aspire Pegasus Box Mod

Constructed of high-grade stainless steel and boasting an optional brass or slate/black color, the Pegasus is certainly a beautiful sight to look at. Underneath that glossed coating is a brushed finish, which gives the mod a stunning high-end appearance. It also features stainless steel buttons, as Aspire only wanted the Pegasus to be made from the best materials for long-lasting durability.

To top it off, the Pegasus is equipped with a 510 spring-loaded center pin so that it's compatible with all tanks available on the market, along with a brightly lit OLED screen so that you get a clear visual of your device's settings. The Pegasus comes standard with the latest technology, temperature control, which gives you complete control over your device. If you're looking for incredible amounts of power, the Pegasus has that as well. You'll be able to take advantage of 160 watts that will easily deliver enough power to any atomizer you can throw on it. To keep all of this running as smooth as possible, a single 18650 battery is used, which is also very easy to change out through it magnetic battery door.

Aspire Triton Tank

The Aspire Triton Tank is one of the most innovative sub-ohm tanks to hit the market. It's constructed of stainless steel body, as well as stainless steel covering its Pyrex glass, which acts as a shield. However, they've left just enough room in the sight windows to indicate how much e-liquid is left in your tank. Speaking of the tank portion, the Triton can hold up to 3.5mL's of e-liquid - enough to increase the time between refills. The top of the Aspire Triton Tank features a wide-bore drip tip, also made of stainless, and was built with performance in mind. Just under the drip tip is a top piece that features adjustable airflow, heat sink fins and can also be removed to conveniently fill your from the top. That's right, the Triton is equipped with a top fill system, unlike any other tank on the market. This makes refilling your tank quick and easy!
The bottom base of the Aspire Triton was also used as a performance enhancer. It features adjustable airflow by two wide slots on either side of the tank. With this much airflow, and the ability to control it, you can dial in on the perfect vape. What's even more impressive about the Aspire Triton Tank is its ability to be used with multiple coil heads for a different experience with each. For a standard performance with mouth-to-lung hits, you'll be able to use the Triton's 1.8 ohm Kanthal coil head. For an increase in performance and sub-ohm territory, there is a 0.4 ohm and 0.3 ohm coil head that utilizes 316L surgical-grade stainless steel - the first atomizer of its kind. To take it a step further, Aspire also made it to where the Triton is compatible with Aspire Atlantis coils, along with the Atlantis Nickel (Ni-200) coils - all coming equipped with 100% Japanese organic cotton for a pure and clean taste.

Aspire Odyssey Kit Features:

Includes: Pegasus Box Mod & Triton Tank

Material: Stainless Steel

Temperature Control

Variable Wattage/Voltage

Dual Adjustable Airflow Control

Wide-Bore Drip Tip

Top-Filling E-Liquid System

Uses Japanese Organic Cotton

Uses Surgical-Grade Stainless Steel Coils

OLED Screen

Compatible With Aspire Atlantis Coils

Powered by a Single 18650 Battery (Sold Separately)

Internal Charging (With Passthrough Capability)

Pyrex Glass Tank

3.5mL E-Liquid Capacity

Can Be Used As RTA (With Separate RTA System)

High Temperature Protection

Short Circuit Protection

12-Second Cutoff Protection

Reverse Polarity Protection

Over-Discharge Protection

High-Resistance

No Atomizer Alert

Low Battery Warning

Pegasus Box Mod Specifications

510 Spring-Loaded Center Pin

Wattage Range: 1W – 70W

Resistance Range: 0.2 Ohms – 5.0 Ohms

Material: High-Grade Stainless Steel

Powered by a Single 18650 Battery

Height: 3.58 Inches (91 mm)

Width: 1.77 Inches (45 mm)

Triton Tank Specifications

Threading: 510

E-Liquid Capacity: 3.5mL

Casing Material: Stainless Steel

Tank Material: Pyrex Glass

Atomizer Coil Type: Standard Resistance / Sub-Ohm

Atomizer Coil Material: Surgical Steel, Kanthal Resistance

Available Resistance: 0.3 ohms, 0.4 Ohms, 1.8 Ohms

Wicking Material: Japanese Organic Cotton

Height: 2.87 Inches (73 mm)

Diameter: 0.86 Inches (22 mm)

iStick TC60W

iSmoka Eleaf iStick TC60W VV/VW Box Mod
Black
Teal
Grey
Blue
White
Price: $42.99 $44.99

Order Now

Elegant and rounded with attractive colors, the iStick TC60W features its changeable magnetic covers for ease of switching your 18650 cell and changing the covers into a different color.
Being powerful with 60W maximum output, it is also updated with the smart technology of temperature control supporting both Nickel 200 and Titanium coils.

Parameter:

iStick TC60W Mod:
Size: 90.0mm*38mm*28mm
Frame Color: Black, Silver
Cell type: 18650 cells (Sony US18650VTC4 is recommended)
Thread Type: 510 Thread
Rated Output Wattage: 1-60W

Compatible coil:
0.05-1.0 ohm - Nickel 200 / Titanium Coil (TC-Ni/Ti mode)
0.15-3.5 ohm - Kanthal Coil (VW mode)

Temperature Range:
100-315℃/200-600℉ (TC-Ni/Ti mode)

Features:

1.Attractive appearance with changeable covers:
Being changeable and colorful, the magnetic covers are designed for ease of switching your 18650 cell and changing the covers into a different color.

2.Functioned with temperature control:
By adjusting temperature and output wattage level (60W max) in TC-Ni/TC-Ti mode, you can enjoy different vaping experiences at different settings without any dry hit.
3.Less power and e-liquid consumption:
In innovative TC-Ni/TC-Ti mode, it will consume much less battery power and e-liquid than in typical VW mode.
4.Stainless steel threads and spring connector:
As a member of iStick series device, it retains stainless steel threads for strong wear resistance and spring connector for high adaptability.
5.Attached necklace hole:
The necklace hole on the battery body are specially attached for ease of always carrying the device with you.

How to charge:

The battery power indicator on the screen of iStick TC60W will keep flashing when the remaining power is less than 10%.
The 18650 cell can be charged in the iStick TC60W through USB port at the bottom of the device via 1A wall adaptor or charged with a separate battery charger.
If charging the 18650 cell in the iStick TC60W, the battery indicator will keep flashing during charging and the screen will go out when fully charged.
iStick TC60W & MELO 2 Atomizer

The iStick TC60W is highly recommended to use with the MELO 2 atomizer. You are sure to get an amazing vaping experience from this perfect match.

iStick TC40W

iSmoka Eleaf iStick TC40W VV/VW 2600mAh Battery Mod
Best match with iJust 2 Atomizer, GS Tank Atomizer
Black
Silver
Grey
Blue
Price: 39.9 54.99

Order Now

iStick TC40W, an innovation of of iStick series battery, adopts newly introduced technical element of temperature control, which will bring out an unique vaping experience by adjusting temperature setting. Despite the small size, it can reach 40W with large 2600mAh power capacity. Moreover, all stainless steel threads and elastic spring connector endow it with strong wear resistance. With temperature control function, power saving will also be a plus.

Parameter:

Size: 36.2mm*22.3mm*77.3mm
Colors: Black, Blue, Silver, Grey
Capacity: 2600mAh
Thread Type: 510 Thread
Rated Output Wattage: 1-40W
Charge Time: 3.5 hours
Rated Resistance Range:
0.05-1.0 ohm (TC-Ni mode)
0.15-3.5 ohm (VW mode)

Temperature Range:
100-315℃/200-600℉ (TC-Ni mode)

Features

1. Temperature control function:
By adjusting temperature in TC-Ni mode, you can enjoy different vaping experience at different temperature settings.

2. Less power and e-liquid consumption:
With temperature control function, it will consume much less battery power and e-liquid in TC mode than in VW mode.

3. Clear OLED display:
In typical VW mode, the OLED displays battery power, resistance, voltage and wattage clearly. You can see clearly battery power, resistance, wattage and temperature in innovative TC-Ni mode.
 
4. Accurate reading of resistance:
The reading of resistance becomes more accurate with the number down to the second decimal point.

5. Large output and power capacity:
Despite the small size, it can reach 40W output with 2600mAh power capacity.

6. Stainless steel threads and spring connector:
It retains stainless steel threads for strong wear resistance and elastic spring connector for high adaptability.

7. Attached Necklace Hole:
The specially attached necklace hole on the top cover makes it more portable and user-friendly.

Experiece Recommend

1.For Mouth Inhalers: GS-Tank Atomizer
If you are looking for a great mouth to lung hit, we recommend this match with the TC40W! It produces lighter clouds and less air draw but replicates the traditional cigarrette inhale. Recommended temperature operation 400-600℉.

2.For Lung Inhalers: iJust 2 Atomizer
If you are looking for a great direct lung hit, this is the product for you! When combining this atomizer with the TC40W, it produces large vapor clouds and a great taste to match it. This is the most enjoyable setup for you cloud-chasers out there! Recommended temperature operation 400-600℉, or in wattage mode 25-40W (depending on your taste).

iStick 50W

iSmoka Eleaf iStick 50W VV/VW 4400mAh Battery Mod
1. 4400mAh 50W VV VW Battery ;2. Temperature Alarm function;3. Side Charging Port
Black
White
Red
Blue
Price: $49.9 $55.9

Order Now

iStick 50W is a super upgraded version based on iStick series batteries. Powerful vapor can be generated due to the expanded range of output voltage(2V-10V)/ wattage(5W-50W) with 4400 mAh battery capacity. It retains strong spring connector and wear-resistant stainless steel thread. Moreover, the additional temperature alarm function makes it high-safety even in strong vaping. Great feeling when you hold it because of its size and the rounded edges, while side charging port is also a plus.

Parameter:

Size:	23.0mm * 45.0 mm * 83.0mm
Color:	black, sliver, red, blue
Capacity:	4400mAh
Thread Type:	510 Thread
Rated output voltage:	2.0V-10.0V
Rated output wattage:	5W-50W
Rated resistance range:	0.2Ω-5Ω

Features:

1.Expanded Working Range and Larger Battery Capcacity:
iSick 50W has a greater progress in working range (voltage: 2V-10V; Wattage: 5W-50W) and battery capacity(4400mAh).

2.Temperature Alarm function:
If the temperature of device is over 70℃, the output will shut off automatically and the screen will reflect “Temp Protection” for 5 seconds.

3.Spring Connector and Stainless Steel Thread:
The spring connection base ensures its high adaptability. The connecting thread is made of stainless steel which makes it more hard-wearing.

4.Side Charging Port:
The USB charging port is on the side of battery which will bring you more convenience.

5.Inherit Advantages of iStick Series:
OLED display, adjustable voltage/wattage and arrow button lock function.

Experience Recommend:

The one that can best match with iStick 50W is the revolutionary Delta Ⅱ. It features a user-friendly adjustment of air inflow. With the Liquid valve control on the new changeable sub ohm coil, Delta Ⅱ can be used on a wide range of wattage from 20 watts to 50 watts.

iStick 30W

Eleaf iStick 30W VV/VW 2200mAh Battery Mod
1. Continuation of iStick Advantages ;2. Arrow Button Lock Functionality;3. Expanded range of output voltage/wattage
Black
White
Red
Blue
Pirce: $34.9  43.9

Order Now

iStick 30W is upgraded based on iSitck through expanding the range of output voltage and wattage. Under the support of 2200mAh battery capacity, it will give you great performance between 2V-8V or 5W-30W. Newly introduced spring connector, wear-resistant stainless steel thread, and streamlined design on top make iStick 30W more suitable for atomizers. More ever, the added button lock functionality protects the buttons and prolong their service life. iStick 30W is the one you deserve to own.

Parameter:

Size: 23.0mm * 32.5 mm * 77.0mm
Color: black, sliver, red, blue
Capacity: 2200mAh
Thread Type: 510 Thread 
Rated output voltage: 2.0V-8.0V
Rated output wattage: 5W-30W
Rated resistance range: 0.4Ω-5Ω

Features:

1.Expanded range of output voltage/wattage: With the voltage lowest to 2V and highest to 8V, wattage lowest to 5W and highest to 30W, iStick 30W can support sub ohm coil, getting ahead of other products at the same level.

2.Spring Connector and Stainless Steel Thread: Newly introduced spring connector insures high adaptability and durability. The connecting thread is made of stainless steel which makes it more hard-wearing.

3.New Streamlined Design on Top: This kind of design enable iStick 30W to be assembled perfectly with 22mm/23mm diameter atomizers.

4.Arrow Button Lock Functionality: Keep pressing the up-arrow button and down arrow button simultaneously for 2 seconds when the battery is on, they will be locked to avoid unintentional presses. You can do the same operation to unlock them.

5.Continuation of iStick Advantages: OLED display, adjustable voltage/wattage, large battery capacity. These advantages that make you love iStick will all be found in iStick 30W.

Experience Guide

Recommends: MELO atomizer + iStick 30W
Melo atomizer is best matching with iStick 30W. You can enjoy a better vapor from this combination.

Shopping Guide

In order to protect your right, pls buy it Eleaf official authorized distritutor online store, Such as istick.org, best pirce and with perfect after-sales services at here