Kanger Juppi Kit

Kanger Juppi 75W TC Starter Kit
1.Stainless Steel Construction
2.Short Circuit Protection
3.Low Battery Indicator
4.High Temperature Protection
Black
Silver
White
Price: $45.90 $59.90
Order Now

Prodcuts Inroduction
The Kanger Juppi Starter Kit features the Juppi TC Box Mod and the Juppi Tank. The Juppi Box Mod fires up to 75 watts and requires (1) high amp 18650 battery (not included). The Kanger Juppi Box Mod supports Nickel, Titanium, Stainless Steel 316 and Ni-Chrome wire in TC mode, or Kanthal, NiChrome, Stainless Steel wire for non TC mode.The Juppi Box Mod has a comfortable side fire button with a smooth stainless steel construction. Batteries are easily replaced with the magnetized battery cover and may be charged via the micro USB charging port.

The Kanger Juppi tank utilizes unique Juppi 0.2ohm atomizer heads which features a unique coil structure design. The coil structure design is very similar to the NotchCoil and is rewickable as well with the included cotton. The coil design allows for a more efficient heating surface area for a smooth vaping experience. The Kanger Juppi Tank features a 3ml e-Liquid capacity glass tank with a convenient top fill design. The Kanger Juppi features dual symmetric airflow slots. It also features a cone drip tip design which allows for a cooler vaping experience and more vapor production.

Juppi Box Mod:
    Dimensions: 3-5/16" x 1-7/8" x 1" (Without Tank)
    Spring-loaded 510 Contact Pin
    Temperature Control : Nickel / Titanium / SS316L / Ni-Chrome
    Temperature Control Range: 100 - 300C / 200 - 600F
    Wattage Output: 7-75W
    Resistance Range: 0.1 - 2.5ohm
    Micro Charging USB Port (DC 5V/1000mAh)
    Requires (1) High Amp 18650 Battery (Sold Separately)
    OLED Display Screen
    Magnetized Battery Cover for Easy Battery Access
    Side Switch Button
    Stainless Steel Construction
    Short Circuit Protection
    Low Battery Indicator
    High Temperature Protection
Juppi Tank:
    Dimensions: 1-15/16" x 7/8" (Including Drip Tip and Threads)
    22mm Diameter
    510 Threaded
    3.0ml e-Liquid Capacity
    Top Fill Design
    Glass Tank
    Symmetric Airflow Slots
    Cone Drip Tip Design
    Unique Kanthal Rewickable 0.2ohm Juppi Atomizer Head
    Coil Design Allows for Efficient Heating Surface Area
    Similiar to the NotchCoil Design Structure
    Comes Preinstalled with Organic Cotton

Package Includes:
1 x Kanger Juppi 75W TC Box Mod
1 x Kanger Juppi Tank
1 x Juppi 0.2ohm Atomizer Head
1 x Set of Spare O-Rings
1 x Micro USB Cable
1 x User Manual

Eleaf iCare

Eleaf iCare All In One Kit
1. High quality produced by Eleaf
2. Five colors optional
3. Easy operation for new vapers
Black
Red
White
Gold
Cyan
Price: $10.90 $18.90
Order Now

Product Introduction
The iCare is a compact e-cigarette starter kit with an internal tank and airflow system. It is quite simple to use for the automatic On/Off feature that initiates when vaping. The e-liquid can be refilled into the tank from top with ease. By using a higher strength e-liquid, the iCare perfectly recreates the sensation you are accustomed to. Also with intuitive three color LEDs, you can easily check the battery status by a simple glance at the color of the light.

Parameter:
Size: 30mm*14mm*75mm
Output wattage: 15W max
Resistance range: 1.0-3.5ohm
E-liquid capacity: 1.8mL
Battery capacity: 650mAh
Color: black, gold, white, cyan, red

Kanger KBOX 200W

Kanger KBOX 200W Box Mod
Fire up to 200W
Powered by two 18650 batteries
Firmware Updates
Black
Red
White
Price: $38.90 $64.90
Order Now

Product Introduction
Kanger's first box mod to breach the waters of high wattage vaping comes the KBOX 200W. Just as the name states, this device does, in fact, push out a maximum wattage of 200! Along with regular power mode, the KBOX 200W also supports temperature control with nickel wire, titanium wire,stainless steel as wells as nichrome. To support these wires, the KBOX will fire atomizers as low as 0.05Ω. This unit requires (2) 18650 batteries (batteries sold separately) that may be replaced by the user or can be charged via the micro USB port located at the face of the unit.

 Specifications:
    Dimensions: 84*56*22mm
    Wattage Range: 7W - 200W
    Temperature Control Capability
    Compatible With Ni200, Ti, SS, and NiCr (Nichrome)
    Requires (2) 18650 Batteries (Batteries Sold Separately)
    510 Threaded
    Spring Loaded 510 Connection
    Micro USB Port
    Firmware Upgradeable
    Compact 200W Mod