Eleaf iJust X User Manual

Notice for Use 
Thank you for choosing Eleaf products! Please read this manual carefully before use so as to use correctly. If you require additional information or have questions about the product or its use, please consult your local agents, or visit our website at http://www.istick.org/.

Product Introduction 
The iJust X, a modern and slick looking mod by Eleaf, has a unibody design with a tank and a 3000mAh battery encased in two metal tubes separately. The tank section can hold a massive amount of e-liquid, extending the time between refills. You can fill the tank from the top conveniently by just removing the top cap. Also the iJust X will provide you with a great vaping experience when using the popular EC coils.

How to Use?
Assembling: 
1. First drip a few drops of e-liquid directly into the coil to make it fully saturated before first use;
2. Unscrew the bottom base, screw the primed atomizer head onto the base tightly, and then screw the bottom base with atomizer head onto the device tightly;
3. Unscrew the top cap, slowly fill e-liquid into the tank through the side slot, and then screw the top cap back tightly until it could not be tightened further. (Note: please don’t overfill and don’t fill e-liquid into the air pipe.)
4. Finally put the mouthpiece on and the iJust X is ready to use.

Replacing Atomizer Head: 
1. Place the iJust X upside down;
2. Unscrew the bottom base and replace the atomizer head with another primed one.
Power on/off: Press the button 5 times in quick succession within two seconds, the indicator light is blue and flashes 5 times to show the device is powered on. In the same way, it can also be turned off.

Vaping: Keep holding the button to take a puff when the device is powered on.

Charging: The device can be charged by connecting it with a 0.5A wall adapter or a computer via the USB cable. The indicator light is red during charging and goes out when fully charged.

Properties and Protections:
Atomizer Protection: Every time when vaping time exceeds 15 seconds, the indicator light flashes 10 times and the output cuts off automatically.

Short Circuit Protection: If short circuit occurs before vaping, the indicator light will flash 3 times quickly and the output cuts off automatically when you start to vape; if short circuit occurs during vaping, the indicator light will flash 3 times slowly and the output cuts off automatically.

Low Voltage Protection: When the voltage of the device is lower than 3.3V, the indicator light flashes 40 times and the device can not be powered on. Charge the device to reactivate it.

Resistance Detect: If the output load resistance is higher than 3.0ohm, the indicator light will flash slowly to indicate that no atomizer is detected when vaping; If the output load resistance is lower than 0.15ohm, there will be no output when you press the button to vape.

Battery Level Indication Function: The indicator light will stay lit or flash slowly after a puff when the battery level is high. On the contrary, the light will flash in frequency.

Warranty 
We are not responsible for any damages caused by human error. Legal warranty is applied.

Warnings 
1. Please keep out of reach of children.
2. This product is not recommended for use by young people, non-smokers, pregnant or breast-feeding women, or persons who are allergic/sensitive to nicotine.

Contra-indication 
1. Do not attempt to repair the product by yourself as damage or personal injury may occur.
2. Do not leave the product in high temperature or damp conditions, otherwise it may be damaged.
3. Do not use this product for other purposes except only for vaping and don’t swallow the e-liquid.

Possible Adverse Effects
1. This product may be hazardous to health and contains nicotine which is addictive.
2. For people with adverse reaction after using this product, it is recommended to use the e-liquid with lower nicotine content or no nicotine.

Eleaf iStick Pico Dual User Manual

Notice for Use 
Thank you for choosing Eleaf products! Please read this manual carefully before use so as to use correctly. If you require additional information or have questions about the product or its use, please consult your local agents, or visit our website at www.istick.org.

Product Introduction 
Eleaf Pico Dual mod is the most compact 200W box mod among those that are powered by two replaceable 18650 cells. Compact yet efficient, it brings forth a high security balance charge system and extends the maximum charging current to be 1.5A for quick charge. The Pico Dual also has preheat function, custom logo as well as different interfaces for you to check your total puffs and total vaping seconds, and its firmware is upgradeable to be always the latest.

Structure

How to Use? 
Power on/off: Push forward to open the battery cover, put two high-rate 18650 cells in correct way into the device and finally close the battery cover. The device can be powered on/off by pressing the fire button 5 times.

Note: 
1.Please be careful not to use cells with torn casing as it is a safety hazard.
2.Please make sure you are using high-rate 18650 cells whose continuous discharge current should be above 25A. 3.Before using, please set the wattage within a proper range that the atomizer you installed can work with.

Vaping: When the device is powered on, long press the fire button to take a puff.
Stealth on/off: Press the fire button and “-” button simultaneously when the device is powered on to switch between Stealth On and Stealth Off mode. In Stealth On mode, you can vape with the OLED screen off and you can press the fire button once to see current setting.
Adjustment buttons lock/unlock: Keep pressing "+" button and "-" button simultaneously for two seconds when the device is powered on, then the "+" and "-" buttons will be locked and the screen will display “Lock”. In the same way, the "+" and "-" buttons can be unlocked and the screen will display "Unlock". Through this operation, you can protect the buttons from unintentional presses and prolong their lifespan.

Switch display mode: Keep pressing "+" button and "-" button simultaneously for two seconds when the device is powered off, the screen display will rotate 180 degrees. You can view the screen from two different angles through this operation. 

Switch display interfaces: In power-on state, choose VW mode; keep holding "+" and fire buttons till the current interface flashes; when it's flashing, press "+"or "-" button to switch among different interfaces; finally press fire button once to confirm the interface you chose. 

Note: the interface can only be changed and selected under VW mode in power-on state. And when one interface is selected under VW mode, the interfaces of TC (Ni, Ti, SS, M1, M2, M3) modes will change accordingly and automatically. 

Preheat function: In power-off state, keep holding "+" and fire buttons till the M1 mode appears; press the fire button 3 times to "Power", and press "+" or "-" button to adjust the wattage of preheat; press the fire button again to "Time", and press "+" or "-" button to adjust the second of preheat or to turn off the preheat function.

Function of charging cell phone: Screw an RC adapter on the device and connect it with a cell phone by a USB cable. When the device is powered on, press the fire button once to start to charge the cell phone.
Function of charging other e-cigarette mod: Screw an RC adapter on the device and connect it with another e-cigarette mod by a USB cable. In power-off state, keep holding "+" and fire buttons till the M1 mode appears; press the fire button 5 times to "USB" interface, and press "+" or "-" button to turn on or off this function. When the "USB" is turned on, 5 clicks of the fire button to power on the device, and in USB Charge mode, press fire button once to start to charge other e-cigarette mod.
Switch vaping modes: When the device is powered on, press the fire button 3 times in quick succession, the device will display current vaping mode. Press the "+" or "-" button to switch among VW, USB Charge (this mode appears only when "USB" is on), TC-Ni, TC-Ti, TC-SS, TCR-M1, TCR-M2, TCR-M3 modes and then press the fire button one time or stay in the interface for about 10 seconds to confirm the vaping mode you chose.

1) VW mode: 

When set in VW mode, the device can support a coil whose resistance is within the range of 0.1ohm-3.5ohm. Adjust wattage: In this mode, the output wattage can be adjusted from 1W to 200W by pressing “+” button or “-” button, “+” button to increase and “-” button to decrease. Long press “+” button or “-” button can rapidly increase or decrease the wattage level. 

2) TC-Ni/TC-Ti/TC-SS/TCR(M1, M2, M3) Mode: 

When set in TC-Ni/TC-Ti/TC-SS mode, the device can separately support Nickel 200, Titanium, and Stainless Steel 316 coils. In TCR (Temperature Coefficient of Resistance) mode, the device can support different temperature control coils within different TCR value ranges and you can set the TCR at different values within proper range. (Resistance range of coil: 0.05ohm-1.5ohm) 

The Setting of TCR Mode (M1,M2,M3): 

When the device is powered off, keep pressing the fire button and the “+” button simultaneously, then you will enter into the TCR (M1,M2,M3) set menu:

1. Press the fire button to choose among M1, M2 and M3 modes; 

2. Press the “+” or “-” button to increase or decrease the TCR value according to the material of the coil you use; 

3. Keep pressing the fire button or stay in the interface for about 10 seconds to confirm your setting. 

Following are different TCR value ranges for different coils for your reference:

Note: 

1.The TCR value in the sheet is 10  multiplied of the actual TCR.         

2.Our total range of TCR value is 1-1000. 

Adjust wattage: In TC-Ni/TC-Ti/TC-SS/TCR(M1,M2,M3) mode, the output wattage can be adjusted from 1W to 200W. Press the fire button 4 times in quick succession to enter the wattage setting menu and press “+” or “-” button to increase or decrease the wattage level. Keep pressing “+” or “-” button without looseness to rapidly increase or decrease the wattage level.
Adjust temperature: In TC-Ni/TC-Ti/TC-SS/TCR(M1,M2,M3) mode, temperature can be adjusted from 100-315℃ or 200-600℉ by pressing “+” or “-” button, “+” button to increase and “-” button to decrease. Each press of the “+” or “-” button will increase or decrease the temperature setting by 5℃ or 10℉. Keep pressing “+” or “-” button without looseness can rapidly increase or decrease temperature setting.
Shift between ℃ and ℉: If you increase the temperature to 315 ℃, and continue to press the “+” button, the temperature reading will automatically change to the lowest Fahrenheit (200℉). Equally, if the temperature is set at the lowest Fahrenheit (200℉) and you continue to press the “-” button, the temperature reading will automatically change to the highest Celsius (315 ℃).
Lock/Unlock resistance: In TC-Ni/TC-Ti/TC-SS/TCR(M1,M2,M3) mode, when the device is powered on, keep pressing the fire button and “+” button simultaneously for two seconds to lock or unlock atomizer “base resistance”. The lock sign will appear when resistance is locked and “Ω” symbol will come back when unlocked.

Note:
1.Please lock the resistance when the coil is at room temperature so that the device can display the correct “base resistance”.
2.In resistance lock mode, when you remove the coil and then put it back, the device can maintain the same “base resistance” although the coil resistance may increase due to the rise of temperature. In resistance unlock mode, when you remove the coil and then put a coil back, the screen may display “New coil up same down” as the coil resistance may increase within certain range. If it is the same coil, press the “-” button and if it is a new coil, press the “+” button. But please unlock the resistance when you want to change an atomizer or a coil of different resistance.
3.When using a common coil or a coil whose resistance is above 1.5ohm in TC-Ni/TC-Ti/TC-SS/TCR(M1,M2,M3) mode by mistake, the device will automatically switch back to VW mode.

How to put custom logo in the device?
Download the file on our official website, plug the device in with USB cable to a computer, and double click the EleafUpdate.exe. Then click “LOGO” and open the image you choose to put it in the device. Finally press the fire button twice in quick succession when the device is powered on to enter logo on/off interface and press up or down button one time to turn on/off logo.

Note: 

1. Please make sure the image you choose is a monochrome image of 96*16 pixels in the format of bmp. 

2. If you fail to put the custom logo in and the device shuts down, press the “-” button once to restart the device. 

Functions of Micro USB Port 

Charging: The battery power indicator on the screen of Pico Dual will keep flashing when the remaining power of the 18650 cells is less than 10%. The 18650 cells can be charged in the device through USB port via wall adapter or a computer or charged with an external battery charger. If the 18650 cells are charged in the device, the battery indicator on the screen will keep flashing during charging and the screen will go out when fully charged.

Firmware Upgrading: The firmware can be upgraded by connecting the device with a computer through the USB port via a micro USB cable. 

Properties

Atomizer Protection: Each time when vaping time exceeds 10 seconds, the output shuts off automatically with “Over 10s” display on the screen. 

Atomizer Low Alert: When the resistance of coil is lower than 0.1ohm in VW mode or lower than 0.05ohm in TC modes, the screen will display “Atomizer Low”. 

Atomizer Short-circuit & No Atomizer Protection: When atomizer short-circuit occurs, the screen will display “Atomizer Short”. The screen will display “No Atomizer” when there is no atomizer connected. 

Low-voltage Protection: When the voltage of the cells is below 3.3V, the screen will first display “Battery Low” and then “Lock”. Charge the cells to unlock the device. 

Temperature Protection: In TC modes, when the actual temperature of coil reaches the set temperature, the screen will display "Temp Protection". You can continue to use the device normally. 

Temperature Alert: If the temperature of device is over alert temperature, the output will shut off automatically and the screen will display “Device Too Hot”. You can continue to vape after it cools down. 

Weak Battery Alert: In all vaping modes, when the device is working with an atomizer and the voltage of the cells drops below 2.9V, the screen will display “Weak Battery”. Meanwhile, the output power will be reduced accordingly.

Imbalanced Alert: If the voltage difference between two cells is equal to or more than 0.3V, the device will display “Imbalanced Batteries” when plugged in. Please fully charge the cells externally or replace the cells with freshly charged cells. 

Check Battery Alert: If the cells are installed incorrectly, the screen will display “Check Battery”. 

Charge Error Alert: When no current is detected in charging state, the screen will display “Charge Error”. 

Check USB Alert: If the voltage of the USB charger is equal to or more than 5.8V, the device will display “check USB” when plugged in or vaping. Warranty We are not responsible for any damages caused by human error. Legal warranty is applied. 

Warnings 

1. Please keep out of reach of children. 

2. This product is not recommended for use by young people, non-smokers, pregnant or breast-feeding women, or persons who are allergic/sensitive to nicotine.

Contra-indication 

1. Do not attempt to repair the product by yourself as damage or personal injury may occur. 

2. Do not leave the product in high temperature or damp conditions, otherwise it may be damaged. 

3. Do not use this product for other purposes except only for vaping and don’t swallow the e-liquid. 

Possible Adverse Effects 

1. This product may be hazardous to health and contains nicotine which is addictive. 

2. For people with adverse reaction after using this product, it is recommended to use the e-liquid with lower nicotine content or no nicotine.

iCare 140 User Manual

Notice for Use
Thank you for choosing Eleaf products! Please read this manual carefully before use so as to use correctly. If you require additional information or have questions about the product or its use, please consult your local agents, or visit our website at www.eleafworld.com.

Product Introduction
The iCare 140 is a new easy-to-use starter kit with an inbuilt tank by Eleaf. It features the spiral mouthpiece design for a more flavorful vortex of vapor. The e-liquid can easily be refilled by removing the top cap and its side USB port is for convenient charging. In addition to the elegant looking, the Eleaf iCare 140 Kit is available in various attractive colors for your choice.

How to Use?
Assembling:
a) How to assemble:
Screw the IC 1.1ohm Head onto the top cap tightly and then you can screw the top cap with atomizer head into the tank.
b) How to fill e-liquid:
1. First unscrew the top cap off the tank;
2. Then slowly refill the e-liquid into the tank;
3. Finally screw the top cap with atomizer head into the tank again.

Note:
1. Please don’t fill beyond the Max mark to avoid overflow.
2. Please first drip a few drops of e-liquid directly into the coil to make it fully saturated before first use.

Power on/off: 
Press the button 5 times in quick succession within 1.5 seconds, the white button light will flash 3 times to show the iCare 140 is ready to use. In the same way, the iCare 140 can also be turned off.

Vaping: 
When the device is powered on, you can long press the button to take a puff.

Charging:
Charge the iCare 140 by connecting it with 0.5A wall adapter or computer via USB cable. The white button light turns on when the device is charging. When the device is fully charged, the light flashes 20 times and then goes out.

Properties and Protections:
Atomizer Protection: Each time when vaping time exceeds 10 seconds, the button light flashes 8 times and the output cuts off automatically.
Short Circuit Protection: If short circuit occurs before vaping, the button light will flash 3 times quickly and the output cuts off automatically when you start to vape; if short circuit occurs during vaping, the button light will flash 3 times slowly.
Low Voltage Protection: When the voltage of the device is lower than 3.3V, the button light flashes 10 times and there will be no output. Charge the device to reactivate it.

Resistance Detect: If the output load resistance is lower than 1.0ohm, there will be no output when you press the button to vape.
Warranty
We are not responsible for any damages caused by human error. Legal warranty is applied.

Warnings
1. Please keep out of reach of children.
2. This product is not recommended for use by young people, non-smokers, pregnant or breast-feeding women, or persons who are allergic/sensitive to nicotine.

Contra-indication
1. Do not attempt to repair the product by yourself as damage or personal injury may occur.
2. Do not leave the product in high temperature or damp conditions, otherwise it may be damaged.
3. Do not use this product for other purposes except only for vaping and don’t swallow the e-liquid.

Possible Adverse Effects
1. This product may be hazardous to health and contains nicotine which is addictive.
2. For people with adverse reaction after using this product, it is recommended to use the e-liquid with lower nicotine content or no nicotine.

Eleaf Invoke with ELLO T Kit is a fantastic choice for every vapers

The new launching from Eleaf, Eleaf Invoke with ELLO T Kit looks really special. A 220W mod, full TC suite, super low resistance of 0.05-Ohms, all powered by dual-18650's. I can't wait to bring you a detailed introduction.

Let's see what it features:

• Comes with a compact and fashionable design
• With large 1.3-inch display screen and easy-to-go interface shows you all essential information
• It can handle tanks up to 27mm without any overhang with centered 510 pin
• Comes with powerful HW coils: HW3 Triple-Cylinder 0.2ohm Head and
• HW4 Quad-Cylinder 0.3ohm Head, allowing great vaping experience with huge vapor
• With convenient Top Fill, the tank can easily be filled with e-liquid by removing the top cap
• All parts of the atomizer can be detachable, it is easy to clean and use
• Features 2A Maximum Charging Current for quick charge and Battery Balancing Trickle Charge System
• With 2 e-liquid capacity: 2ml and 4ml
• With Dual Circuit Protection and Reverse Polarity Protection, you can vape with safety
• Use for power bank mode, providing power to your cell phone or other e-cig device.
• Firmware Upgradeable

What the package include:

• 1x Eleaf Invoke(without batteries)
• 1x ELLO T Atomizer
• 1x QC USB Cable 
• 1x HW3 Triple-Cylinder 0.2ohm Head
• 1x HW4 Quad-Cylinder 0.3ohm Head
• 2x User Manuals 
• Spare Parts(include 4ml Glass Tube)

It's really a fantastic choice for every vapers, it is available for 4 color options, included Black, Greenery, White, and Silver. You can get it on Eleaf® iStick E-Cigarettes Vape Online Store.

Aloe Garden The Aloe E-liquid With Cool Flavor

Aloe Garden the aloe e-liquid with cool flavor 

giving you monotonous but extraordinary feeling 

      In today's market, e-cigarette oil has a tendency to homogenize various tastes, which has been felt by many players. When a brand is enthusiastically pursued by players, there are plenty of other big brands offering the same type of taste such as raspberries, grapefruit and red wine flavors. So creating a "new road" of smoke oil will give the player fresh feeling. What we share with you today – Aloe Garden the aloe e-liquid with cool flavor belongs to this type of product.

      Aloe plants are popular because they are easy to grow and are ornamental plants with flowers and leaves. In addition to being cultivated, they are also frequently used in beverages. In fact, this kind of drink is very popular in our life, but this type of taste is rare in the e-liquid market. In addition to making ice elements more consistent with the summer experience, the appearance of Aloe Garden the aloe e-liquid with cool flavor can bring enough freshness.

      In the opening of the bottle, Aloe Garden emits a very refreshing taste of aloe juice, besides, it can be distinguished a trace of sweet taste that come from fruit. From here we can learn that it does not taste like the aloe and grapes that we often drink. In the instant of smoking after the e-liquid atomizing, the first feeling that we can experience is strong impact of cool accompany with the fresh and sweet flavor that comes from aloe juice. Besides, in order to avoid the e-liquid tastes too monotonous, we add a little pineapple flavor in it and you can feel it.

      From the description about the flavor of the aloe e-liquid above, I'm sure you have known the basic flavor of it. In general，the taste of it is fresh which can be made by mixing light sweet aloe juice with a cool mint. This kind of single-flavored e-liquid is certainly a boon for people who prefer a fresh taste. So, at first glance, it doesn't seem to have much showy point, but it's that simple sense of affinity that gives players an extraordinary sense which can make them taste all day long without boredom. Finally, if you want a more cost-effective product, you can also choose Eleaf. For more details, please click Eleaf® iStick. Wish you a happy vaping experience.

Eleaf iStick Trim User Manual

Notice for Use
Thank you for choosing Eleaf products! Please read this manual carefully before use so as to use correctly. If you require additional information or have questions about the product or its use, please consult your local agents, or visit our website at www.eleafworld.com.

How to Use?
Power on/off: press the button 5 times in quick succession, and the LED light(s) will flash 5 times to indicate that the device is powered on. In the same way, it can be powered off by 5 quick clicks.

Vaping: keep holding the button to take a puff when the device is powered on. When vaping, the LED light(s) stay lit. The quantity of the lit-up LED light(s) indicates the remaining capacity of the battery.

Select power level: when the device is powered on, press the button 3 times in quick succession  to select output power level. The output watts are different according to the resistance of the coil you use and the power level you choose.

Charging: simply charge the device by connecting it with a computer or a wall adapter via USB cable. The LED light keeps flashing during charging and will go out when the device is fully charged. 

Properties and Protections: 

Atomizer Protection: every time when vaping time exceeds 15 seconds, the output cuts off automatically and the LED light first flashes 10 times and then stay lit for 3 seconds.

Short Circuit Protection: if short circuit occurs before working, the LED light will flash 5 times and there will be no output when you press the button to vape. If short circuit occurs during working, the LED light will flash 3 times. 

Low Voltage Protection: when the voltage of the device is lower than 3.3V, the LED light flashes 40 times and device powers off. Charge the device to reactivate it. 

Resistance Detect: if the output load resistance is higher than 3.0ohm, the LED light will flash slowly to indicate that no atomizer is detected when vaping; if the output load resistance is lower than 0.6ohm, the indicator light will flash 5 times to indicate a low output load or a short circuit when vaping. 

Warranty

We are not responsible for any damages caused by human error. Legal warranty is applied.

Warnings
1. Please keep out of reach of children.
2. This product is not recommended for use by young people, non-smokers, pregnant or breast-feeding women, or persons who are allergic/sensitive to nicotine. 

Contra-indication
1. Do not attempt to repair the product by yourself as damage or personal injury may occur.
2. Do not leave the product in high temperature or damp conditions, otherwise it may be damaged.
3. Do not use this product for other purposes except only for vaping and don't swallow the e-liquid.

Possible Adverse Effects
1. This product may be hazardous to health and contains nicotine which is addictive.
2. For people with adverse reaction after using this product, it is recommended to use the e-liquid with lower nicotine content or no nicotine.

You can get it on the Eleaf® iStick E-Cigarettes Vape Online Store.

Vaping Safety Tips

Here are a few things you can do to ensure the safety of yourself as well as others around you:

• If you don't already smoke, do not start vaping now.
• Choose the best vaping gear from the most renowned manufacturers, like Eleaf® iStick E-Cigarettes Vape Online Store, because low-quality vaporizers can pose several threats and risks to your health that may not even be related directly to vaping.
• Avoid vaping in places where smoking is prohibited.
• For a healthier lifestyle, eliminate nicotine from your e-liquids. Most manufacturers allow you to choose a nicotine strength, which makes it easy to gradually cut down the intake and eventually vape e-liquids with 0% nicotine.
• Always prefer child-proof bottles for your e-juices, and keep them out of reach of children and pets because if an e-liquid contains nicotine, it can be poisonous if ingested.
• Take precautionary measures to ensure battery safety, especially if you are using the 18650 vape batteries. Don’t use a charger other than the one recommended by the manufacturer; don’t overcharge or over-discharge the batteries; store the batteries which are not in use in a safe place (preferably in a plastic case); and don’t carry loose batteries in your pocket.

Why Is iKuun i80 A Leading Device

      Eleaf returns with their sexiest, most compact device yet. The iKuun i80 kit sacrifices no features and even manages to squeeze in a few new ones. Here is why the Eleaf iKuun i80 leads the pack.

iKuun i80 Mod
      Its size is 38mm*27mm*128mm. The ikuun i80 mod is well-built. It comes with a 3000mAh built-in battery. The Eleaf iKuun i80 mod packs more than enough wallop for most vapers. Because its maximum output wattage is 80W. With the large capacity, the unit will provide you a perfect vaping experience. The temperature control, hard, soft and standard modes make the iKuun i80 one of the most customizable mods on the vaping world. It has a super detailed screen. If you need to know everything about your vape, at a glance? The iKuun i80 is easy to read screen puts the information in front of you.

MELO 4 Atomizer
      The atomizer has airflow adjustment. With a highly adjustable system, the device can go from thick and flavorful to huge clouds with a simple twist. That is sufficient for a whole day for many vapers with 2ml or 4ml tank volume. It features a top filling system that easy to open and cleaner than other tank types. Finally, the upgraded EC2 series coil will provide you an ultra vaping experience.

      Finally, you can buy it at Eleaf® iStick E-Cigarettes Vape Online Store. There are six beautiful colors for you to choose. The kit has a full range of unique colors, including: greenery, silver, white, red, black, and blue. Whatever your style, there is an iKuun i80 finish for you.

Safety Advice For Mods with Replaceable Batteries

Replaceable batteries, like Eleaf iStick Pico RESIN mod are more economical, but involve a greater awareness of battery safety. These mods usually require an external charger, although some can be charged by USB. Many of the above points apply to using mods with removable batteries, but there are extra concerns you should be aware of.

Charge Properly – Use a good quality charger for your batteries, such as the Nitecore charger series. Remove them as soon as they reach full power, and let them rest for an hour or so. This reduces the risk of failure.

Use Quality Batteries – Never buy batteries from an unverified source as there are many fakes on the market. Only buy trusted brand names from authorized dealers. Samsung 18650 IMR batteries are the most popular option when it comes to removable batteries, as they are safe and long-lasting. However, we recommend you research what the most suitable batteries are for your particular mod, and most importantly never use different styles of battery in the same device.

Battery Holder – Never carry your batteries loose as they can suffer serious damage if they knock against coins, keys or each other. Batteries are delicate objects and may fail and cease working, or at worst they could leak or explode. Buy a simple plastic battery holder to avoid these risks.

20700 Battery Is Going To Be The Future

If you are swinging from a 20700 mod and a 18650 cell, you can hardly decide which one to buy. Here I am going to help you to make a choice.

Nowadays, with so many vapes powered by 18650 cell, however, this does popularity does not mean that 18650 battery is the perfect one. In fact, the 18650 cell is going to be lagged behind by those newly-invented cells like 20700 battery.

You may ask me what’s the difference between this 20700 mod and ordinary 18650 cell. However, the 20700 cell is more intensive with a large battery capacity and longer battery life. Besides, comparing with ordinary 18650 cell, 20700 battery is capable of outputting higher power.

There are many 20700 mods in the market now. For example, the Wismec Reuleaux RX2 20700 mod, able to employ the dual 18650 cells and the 20700 cell. And many other brands like Smok, Joytech, Aspire all use the newest 20700 cell. And it is predicated by many experts that Wismec Reuleaux RX2 20700 mod is going to occupy the whole market.

So here I strongly recommend you to try a 20700 mod. For example, you can buy the newest mod released by Wismec Reuleaux RX2 20700 mod to follow the trend and have a wonderful vaping experience!

A Must-see for Green Hands

       Don't rush to change your equipment, following are three questions for green hands about the "Big Smoke". "Big Smoke" is definitely a representative word in the development history of electronic cigarette. Especially for the green hands, they would pay more attention to "Big Smoke". However, for most green hands, it' s impossible for them to get the idea what is "Big Smoke", because there are too many knowledge related to the techniques. But I will teach you some secrets, they will help you to get started. In fact, experiencing "Big Smoke" is not a hard deal.

Mechanical gears = bigger smoke? 
        Many green hands would be brainwashed by a view that there would be a bigger smoke if we use mechanical gears. But for skillful vapers, mechanical gears not the present of electronic cigarette, on the contrary, the number of the coil data bear by mechanical gears is smaller than main engine.

"Big Smoke" must together with low resistance?
        Low resistance can bring an instantaneous explosive power, and it speed up the efficiency of producing smoke comparing with the high resistance.

More coil winding = bigger smoke?
        The production of smoke is related to many factors, if you blindly pursue the big smoke, it's certain that you may leave an irreparable damage to your equipment.

Finally, insert a popular vaping brand that you can click: http://www.istick.org/.

Is E-cigar safe?

Nowadays, E-cigar has become a trend for many nicotine fans. The appearance, taste and equipment of E-cigar show more attractive, various, fashionable and practical E-cigars are gaining more and more popularity. Then, many people put out a same question：Is E-cigar really safe? Due to the "unknown" of E-cigar, many smokers still favor traditional cigarettes rather than this new thing. Moreover, the false advertising of merchants exaggerate the function and effect of E-cigar, leading a great psychological gap to the consumers. Though the sales volume rose, but this behavior leave a bad opinion to public.

To some degree, E-cigar is a kind of special culture with its own area. Take photography as an example, camera has many types as E-cigar. Different people use different camera. General use portable pocket camera, due to its size is convenient to carry, and its operation is easy. But for professional, they would choose single-lens reflex camera. Though they all have the function of shot, but the quality of photo is distinguish. Some people assume that phone can defeat single-lens reflex camera as for this function. However, for the professional, phone is just a phone, can not replace camera.

There is not a definite conclusion comes from medical field that E-cigar is bad for human health. Many people take the nicotine as a toxic in cigarette, as the matter of facts, tar in cigarette is most harmful for human health rather than nicotine.

Before purchase an E-cigar, you should have a comprehensive knowledge of it. The more you know about it, the less possibility that you are trapped by merchants.
Click http://www.istick.org/ to know more.

Eleaf iStick Trim Kit Review

Convenience and portability have become buzzwords in the vape world, and iStick Trim Kit is a simple, easy-to-use vape device by Eleaf. It is a great little vape kit especially for newcomers to vaping. This is a solid little kit featuring the iStick Trim with a powerful 1800mAh built-in battery topped with the GSTurbo tank. The kit has silver, green, black, red and smart rose gold.

Standard Configuration
The package of Eleaf iStick Trim with GSTurbo comes with 1 x iStick Trim MOD, 1 x GSTurbo Atomizer, 1 x GS Air 0.75ohm Coil (Pre-installed), 1 x GS Air 1.5ohm Coil, 1 x USB Cable, 1 x Manual and Spare Parts.

iStick Trim Battery Specs
Size: 35mm x 15mm x 72mm
Battery capacity: 1800mAh
E-liquid capacity: 1.8ml
Maximum Power: 22W
Resistance range: 0.1-3.5ohm
Thread type: 510 thread
Charge: 2A Quick Charge

GSTurbo Atomizer Specs
Size: 15mm x 58mm
E-liquid capacity: 1.8ml
Coil: GS Air 0.75ohm Coil(Pre-installed), GS Air 1.5ohm Coil

The iStick Trim Kit (http://www.istick.org/eleaf-istick-trim-with-gsturbo-starter-kit.html ) is a very smart fashion starter device, and Eleaf looks like they have a winner on their hands!

Some vaping terminologies

Below is a list of words or abbreviations, or acronyms that you'll find invaluable as you move through the stages of being a vaper.

• PV – Personal Vaporizer (think e-cigarette that has been beefed up)
• APV – Advanced Personal Vaporizer
• Atty – Atomizer
• Cart – Cartridge
• Carto – Cartomizer
• Bat – Battery
• Filler – The fiber found inside your cartomizer that holds your e-liquid
• Tank – Sub-ohm or otherwise – usually made with glass and stainless steel)
• PCC – Personal Charging Case
• PT – Passthrough or passthrough battery
• 2-piece/Disposable – 2 part e-cigarette. The Battery and a "cartomizer".
• Cartomizer – An atomizer built into the cartridge, marketed as disposable (you throw it away when the e-liquid is used up).
• Cutoff – Refers to how long the battery will activate the atomizer before shutting down (safety measure to protect the atomizer).
• E-juice, e-liquid, juice – the liquid that you fill your cartomizers/clearomizers/tanks with.
• DIY – Do it yourself (homemade e-liquid mixture)
• PG – Propylene Glycol
• VG – Vegetable Glycerin(Glycerine = glycerin = vegetable glycerin(e) = glycerol)
• PEG – Polylethylene Glycol
• Noob – Beginner
• FDA – Food and Drug Administration
ECA – Electronic Cigarette Association
NRT – Nicotine Replacement Therapy (patch, gum, e-cig)
PH – Public Health
BP – Big Pharmaceutical Companies
BT – Big Tobacco Companies
ALF – American Legacy Foundation
‘Anti’s – Anti-smoking people who do not acknowledge that vaping is a viable alternative to smoking analogs.
RYO – Roll your own (tobacco)

The remedy of vaping dehydration side effects

You need water to function. Without it, you can suffer a variety of awful problems, ranging from cramps to heat stroke to seizures and even kidney failure. But before you get to those extremes, you’ll have some lesser dehydration symptoms.

The lesser symptoms are what vapers typically encounter. It happens because the base of the e-liquid we vape is made from propylene glycol (PG) or vegetable glycerin (VG) — or a combination of the two. PG and VG are hygroscopic. That means that they absorb water.

When you inhale vapor, it doesn't make your mouth, throat, and esophagus moist. Rather, it takes the moisture from your mucus membranes and sends it back out in that majestic cloud you exhaled. Put simply, vaping dries you out. And a dried out vaper can have some issues.

• Dry skin – sometimes with a rash or acne
• Dry mouth
• Dry eyes
• Scratchy or sore throat
• Coughing
• Headache
• Nosebleed

I've personally met many vapers who had some combination of those symptoms, and they all offered the same remedy: drink more water. And they're right. Taking fluids into your body is the only way to counteract the moisture leaving your body. So drink a lot of water, tea, soda, juice, or anything you like.

Not beer or coffee though! It's true that the moisture of alcoholic beverages hydrates you, but the alcohol actually inhibits your body's ability to retain water, so essentially you won't make up for the fluid you lose by vaping. Caffeine has a different but related effect. It can make you urinate more often, which also can contribute to dehydration. So if you're heading to the coffee shop or local bar, have a glass of water on the side.

Power, Autonomy And Compactness

Reuleaux RX2/3 was designed by Jaybo and constructed by Wismec. The mod has the same function as Reuleaux 200S. The advantage of Reuleaux RX2/3 is that can be used with two or three rechargeable 18650 cells, because of its additional cover. There are double gain, weight and compactness.

When switching from three batteries to two batteries, the Reuleaux RX2/3 automatically reduces the maximum power from 200 W to 150 W, and its LED screen is fully readable and displays all the necessary information. The unit offers all the vaping modes: VW/TC-Ni/TC-Ti/TC-SS/TCR. If you're looking for a box of power, autonomy and compactness, it's a choice you can't miss.

For more details, please click http://www.wismec.org/wismec-reuleaux-rx2-3-upgradeable-firmware-150w-250w-vw-tc-box-mod.html.

How to use e-Liquid Vaporizers

For mouth to lung, you first inhale the vapor into your mouth and then inhale into your lungs. This method is best for PG e-liquids, has less of a throat hit and more flavor. For direct lung inhale, you would inhale straight to your lungs. This method is best for cloud chasing and has a more intense hit.

To use e-cigs, you would either use the e-cig until it's finished and throw away (disposable) or use and then replace the cartridge (replaceable). Closed pods are simple to use by simply popping in a new cartridge when the old one is done and draw.

To use vape pens, all you have to do is refill the tank with e-liquid. To turn on or off, simply press the firing button 5 times and to use, hold the fire button while drawing.

For sub-ohm tanks in vape mods, you can fill them from either the top or bottom. To fill, take the dropper from the e-liquid bottle and fill at an angle. After that, you are all set.

Eleaf iKonn 220 Review

Eleaf decline their famous iKonn. This time, it comes in a dual 18650 cells version with a maximum power of 220W.

1. Very large format
Rather compact with its 85.3mm high, 44mm wide and 28mm in diameter, the iKonn 220 is a box powered by two 18650 batteries that are inserted by the bottom.

2. Handling is delicate
The box mod is designed with an iconic pattern of Eleaf iKonn Series, and different colors are mixed into one mod. It can be said to be small, because it can hold in small hands. Next, The 0.91 inch screen is located on the body of the box. It is quite small but its readability is acceptable and all the important information are displayed (power, battery level, resistance value).

3. Technical review
The main features of Eleaf iKonn 220 box mod are:
Size: 44.0mm*28.0mm*85.3mm
Weight: 133.5g
Battery: Two 18650 batteries with continous discharge value above 25A
Power:  1-220W
Vaping modes: VW/TC(Ni, Ti, SS, TCR-M1, M2, M3)
Resistance range: 0.05-1.5ohm(TC modes), 0.1-3.5ohm(CW modes)
Temperature control range: 100-315℃
Maximum charge current: 1.5A
Upgradeable firmware
Colors: Blue Black, Full Black, Red Black, Gold Black, Greenery Black and Silver Black

The package comes with:
1 x iKonn 220 battery body
1 x QC USB cable
1 x warning card

In summary, Eleaf iKonn 220 mod is a powerful electronic box, well finished and with a satisfying battery autonomy. Its weakness is a bulky aspect that prevents it from being carried out everywhere. Its price, however, around $29.9, is very attractive.

Nicotine side effects

Most vapers at one time or another experience the effects of vaping too much nicotine. Because we self-titrate — meaning we vape nicotine until we have the effect we want and then stop — it can be easy to misjudge, especially if you're trying an e-liquid in a stronger concentration than you're used to, or using an atomizer that delivers more vapor than you're used to.

We're not really concerned here with the effects of a nicotine overdose, since that is easily avoided by not drinking nicotine in high concentrations. An adult would have to absorb 500 mg or more of nicotine to die, according to Prof. Bernd Mayer. But you weren't planning on doing that anyway, right?

The typical effects of vaping too much nicotine are probably familiar to you already:

• Dizzy or lightheaded 
• Headache 
• Nausea 
• Cold sweats 
• Insomnia 
• Racing heart 
• Anxious or jittery 
• Ringing ears

If you start to feel any of those things, stop vaping for a while. They’ll go away. If you constantly suffer those side effects, either vape less or lower your nicotine level.

What Is Vaping?

Meaning of vaping: the act of inhaling vapor produced by any kind of electronic cigarettes or individual vaporizer. An electronic cigarette is a battery powered device that heats a coil housed in an atomizer that converts e-liquid(or e-juice) into vapor. The e-liquid(or e-juice) that goes into the atomizer is a mixture of propylene glycol and vegetable glycerol, usually containing a water-soluble food flavorings. Nicotine is optional and customizable.

Today, vaping is a hot topic. It has parked one of the biggest debates in the history of public health and has been published in every newspaper and television news program. There are at least 10 million Americans who vape recently, and more than two million people are no longer smoking. Global numbers are hard to determine, but there may be 30 million or more vapers.

The story of vaping is a interesting story. A perfect example  of true free-market capitalism, or consumer response to government intervention in unresolved health crises, or user-driven technological revolution. This may be all three things!

How to avoid coil gunk

As coil gunk appears to be an extra source of aldehydes and probably of furans as well, it is important to be very attentive to what happens in the atomizer. So how can we avoid it?

• Avoid over-tasting e-liquids, potentially those including sweet, chocolate, butter, cherry, cinnamon and menthol flavors; 
• Do prefer multiple coil than single coil atomizers, 
• Change your coil frequently (at least once a week in case of daily use, or earlier) and, each time; 
• Clean the atomization chamber from organic residues; 
• If you don't replace your coil, clean it up by using alcohol instead of acetone to degrease it and rince it with hot water; 
• If available, calibrate your device to enable temperature control features; 
• Regulate temperature in the lower range (PG's boiling point is 188°C or 371°F; VG's boiling point is 290°C or 554°F) 
• Use moderate power and avoid situations where a high consumption of e-liquid is expected (DL inhalation, dripping, power-vaping)

It may however happen that gunk builds up, even when vapers take all the above precautions. In this case, it is highly recommended to clean up your atomizer when changing the coil.
To clean your atomizer:

• A few drops of liquid soap (the one you use to clean dishes) will help removing greasy residues. 
• A smooth brush (a teeth brush or a bottlebrush) will exert a mechanical action against the crust. 
• Alcohol seems to a better option than acetone to remove greasy remains. 
• Hot water to soak the different parts of the atomizer overnight.

An Powerful Mod

If you want to upgrade your current setup and have a perfect vaping experience, then the mod might just be a perfect compromise between the performance and functionality you've been looking for. It is called iStick QC 200W.

The Eleaf iStick QC 200W 5000mAh battery is an interesting design that uses a built-in 5000mAh battery to produce power. Its high-tech design is relatively compact, and its size is only 52mm*25mm*83mm, and the weight is only 195g. Its sleek design and simple operating system make it an ideal tool for daily use. It can provide superior vaping experience at higher wattage output. Now, the portable device has six new, interesting and fashionable colors. There are red, brow, black, green, silver and wood grain.

Advice From Veteran Vaper

Vaping have greatly improved the health of smokers. From my personal senses, it can be said to be immediate. After using the electronic cigarette for a week, my face became ruddy and lustrous. I recommend vape for smokers who are younger or more receptive. But I don't recommend it for the elderly.

First, don't buy vape that looks like cigarettes. You'd better buy famous products, and study before you buy it. There are many tastes in oil, you will fell greasy when you using a product all the time. In general, you can try a few flavors of oil separated from each other, so that would be better. Finally, you can buy vapes in Eleaf Vape Shop. There are many products I like very much. Eleaf has been popular by everyone. For each vaper, Eleaf is a good choice that you can't miss.

How does an e-cigarette work?

A fully set up e-cigarette has a charged battery, a tank full of juice and a coil. When you press the button (or take a puff, with the cheapest models) the battery starts feeding power to the coil. Because this is made of thin metal it quickly heats up, and so does the liquid in contact with it. Almost instantly, the coil is surrounded with a small, but dense, cloud of vapour.

When the vaper takes a puff air is drawn in through the air holes and over the coil. This pulls the vapour up to the mouthpiece, allowing more liquid to evaporate. The coil will carry on creating vapour until the airflow stops or it overtakes the wick’s ability to feed it liquid. Most vapers inhale for up to five or six seconds, and with a modern e-cig that can create a lot of vapour.

How To Protect iJust S

Whenever we have a device that we like very much, we use it carefully and protect it. When we have iJust S, how should we protect it? Now let me give you some tips.

First, in atomizer. Atomizer has a self-protection function, so you don't have to worry about it. Because when you use it for more than 15 seconds, the device will turn off automatically, and the white button will blink 10 times. When you press the button, the white button light flashes slowly, and indicates that no one atomizer is connected. In short-circuit protection, when the resistance is less than 0.15ohm, the white button light will flash 3 times. In Voltage, When the voltage of the Eleaf iJust S 3000mAh 4ml vape pen kit is below 3.3V, the white button light will flash 40 times. When the voltage is above 3.7V, the low-voltage protection will be unlocked automatically. Finally, when the battery level is high the white button light will stay lit or flash slowly. In stead, the light will flash in frequency.

Eleaf iJust one kit open box review

It is a comfortable format at a very competitive price. The iJust one target is wide from the beginner discovering vaping to the experienced vaper looking for an easy hardware.

The iJust One by Eleaf is an all-in-one kit, which means that the tank is included in the battery part. The latter has an autonomy of 1100 mAh with a maximum power of 50 W. Very light (84g), this e-cigarette is also very short (10.3 mm) for 2.2 cm in diameter. It's very comfortable in hands.

The pack of Eleaf iJust one kit includes:

• 1x iJust One 
• 2x resistances: EC Head 0.3 Ω and GS Air 0.75 Ω 
• 1x Resistance adaptor EC Melo/Atlantis 
• 1x spare tank 
• 2x silicone O-rings 
• 1x USB cable 
• 1x user manual and warnings 

The package includes two resistance coils for mouth-to-lung vaping. The GS Air is simply screwed in the metal adaptor EC Sleeve. It is an excellent idea that allows using the resistances GS Air and GS Air dual coil by Eleaf.iJust One also accepts EC resistances, EC Notchcoil and ECML for an exceptional versatility of vaping styles.Well finished, powerful, easy to use, the iJust one all-in-on starter kit just $16.90 now, is a good value for money.

You Will Have A Great Vaping Experience

Convenience and portability have become buzzwords of vape. Manufacturers are striving to create simple and easy-to-use vape devices, and starter kits is going head-to-head. Eleaf is a veteran in this field, and the iStick Trim Kit is their newest innovation. The vape kit has red, black, silver, greenery and rose gold. I think that always a suitable one for you in a variety of fun colors.

The Eleaf iStick Trim with GSTurbo kit adopts a basic from factor with the slim. Its thin, lightweight and elegant  frame houses an 1800mAh built-in battery and LED battery bar. To keep things simple, Eleaf has included three power settings – high, modest and low – with a maximum output wattage of 22W. The iStick Trim mod paired with the GSTurbo atomizer. The atomizer offers a newly-introduced refined airflow system. This, together with the pre-selected GS air coil, should ensure intense flavor at low outputs. So you can have a great vaping experience. Many people also believe that iStick Trim kit is a simplified vaping setup geared towards fans of mouth to lung vaping.

Sub-Ohm and Plus-Ohm Vaping

With sub-ohm or regular ohm vaping, it all comes down to the kind of tank you're using – or more specifically, the actual coil in the tank. Each coil comes with its own ohm rating, usually written on the side. Ohm is a unit of electrical resistance, and to put it simply if the coil is below 1 ohm it is sub ohm and if it's above 1 ohm it is plus ohm. But how does this relate to vaping? Well, this simple difference has dramatically different effects. Let's look at each in turn.

Plus-Ohm Vaping
If a coil has high resistance, eg. if it's 1.8ohms, this means it is resisting more power from the battery and will take longer to heat up and reach a certain point. In turn, this means your e-juice is vaporized at a lower rate compared to a sub ohm coil. This means batteries for plus-ohm vaping don't have to give out as much power, and can be small and subtle. Regular-ohm vaping is most suited for a style of inhale known as Mouth To Lung (MTL).

Sub-Ohm Vaping
Sub-ohm coils have lower resistance meaning they heat e-liquid quicker and more powerfully. This makes for a dramatically different sensation from a regular ohm vape, with much more vapor production and a warmer and more substantial mouthfeel. This is a relatively Plus-Ohm vs. Sub-Ohm vaping new form of vaping and only became widespread over the past couple of years as vape technology became more advanced. Batteries need to be bigger to be able to produce more power meaning safety is a more pressing issue when using this kind of set-up. Sub-ohm vaping lends itself to the Direct Lung Inhale (DLI) style of draw.

The Choice For Starters

The Eleaf iKonn 220 with ELLO kit is geared towards those who is beginner. The mod offers an impressive 100W of power which will impress those who are truly into chasing clouds. The unit also comes with the new ELLO tank which offers great vapor quality and a hassle free experience.

I really enjoyed our time the iKonn 220W, and it has a nice curved shape that feels great in your hands and responds easily to the press of a button.  The mod features higher output power that max up to 220W, and required dual replaceable 18650 cells. The display is bright, vibrant, and easy to read in most lighting situations. The mod also has preheat function and switchable interfaces for easy operate it. There are two optional E-liquid capacity for you to choose, 2ml and 4ml. The package of Eleaf iKonn 220 with ELLO starter kit comes with one iKonn 220 battery body, one 2ml or 4ml atomizer, one extra HW4 quad-cylinder 0.3ohm head, one ELLO 4ml Glass tube, one air pipe, one B type mouthpiece, one set sealing ring, one QC USB cable, and one warning card. The tank itself is top filling making it more convenient when topping up your juice and switching atomizers is easily done by twisting off the bottom of the device to reveal the installed atomizer. Overall we really enjoy the construction of the iKonn 220 kit. It is built for convenience and built to last.

How to vape e-liquid

Unlock or turn on your device, and make sure it is at the lowest recommended setting, which is usually written on the coil head itself or the user manual. Do not dismiss the user manual!

Place your lips on the mouthpiece first and take a drag while simultaneously pressing the fire button. Inhale and then quickly just let it out.

If you are not used to the sensation of vapor entering your lungs, it may take some getting used to, especially when transitioning from smoking. You might even cough or sneeze. This is completely normal. Just start on a lower power setting, and take smaller puffs at first.