Vaporesso VECO DEVIL Tank User Manual

The Vaporesso VECO Devil is the pinnacle of cloud chasing achievement within a Sub-Ohm system, featuring the Vaporesso Eco Universal Coil to deliver the most original flavor of your juice and easy coil replacement system guaranteed. Adopting the cup design of VECO family, it is still top fill and top airflow adjustment with expanded airslots, truly leak free design for a cloud chasing satisfaction.

How To Use
Adjustment of Air Flow: The top airflow system can be adjusted with slight twisting motions of the top lid which will not loosen its attachment to the pyrex glass.

Filling E-liquid: This easy top-fill tank will only ask of you to screw out the lid and fill in the chamber when the base is securely shut.Be sure to safely position the glass part when this process is in place to avoid spillage.

Changing Atomizer: Unscrew the base to simply remove and insert a new atomizer whenever needed. Pull the EUC out from the base and insert a new one. Screw the Base on. Wait after replacing to make sure the coil is well primed.

Warning
1.When using a new atomizer, after filling in e-liquid, let the tank stand for 2 minutes, so the ceramic coil can be saturated with juice before firing
2.Refill the tank before the tank becomes completely empty in order to avoid dry burnt or damage to the atomizer
3.Keep it out of reach of children and pet This device should not be used by persons under the age of 18 or non-smokers.

Ti and Ni Temp Control Mode of IJOY Solo Mini

Are you using IJOY Solo Mini? Do you know how to shift Ni/Ti mode? Take some puffs to find your desired vaping taste before switching to TC mode. Press "T" button IJOY Solo Mini 3 times in quick succession to choose Ni or Ti mode.

1. To shift between Ni/Ti mode please make sure you are in VW mode.
2. Keep pressing the "T" button, the screen will go back to VW mode.
3. Press up and down to choose Ni/Ti mode, then wait 2 seconds and Solo Mini will enter the selected mode automatically. The defaults temperature is 450℉/ 230℃.
4. Press up/down button to set the temperature value, coil temperature can be adjusted from 300-600℉/150-315℃ range. The temperature will be increased in 5℉after each press.
5. The temperature loops between ℉ and ℃.

Vaporesso Swag Starter kit User Manual

How to Use
Switch On/Off: Press the fire button 5 times in quick succession within 2 seconds to turn the device on. In the same way, the device will be powered off after 5 presses.

Vaping: Hold the fire button and inhale through the mouthpiece. Release the fire button and exhale.

Screen Display: After switch on, the OLED displays voltage resistance, battery level, temperature, output wattage etc. Press the fire button at any time, the screen will be lit with main menu.

Automatic atomizer recognition: The mod will read the coil's resistance as soon as the connection is detected. It will also recognize coil type, when a kanthal coil is used, the mod will shift from TC to wattage
mode automatically.

Adjustment buttons lock/unlock: Keep pressing mode button and “+”button simultaneously for two seconds when the device is powered on, then the up and down buttons will be locked and the screen will display “SYSTEM LOCKED”. In the same way, pressing the up and mode buttons can be unlocked and the screen will display “SYSTEM UNLOCKED”.

Switch display mode: Keep pressing up button and down button simultaneously for two seconds ,the screen display will rotate 180 degrees.

Switch vaping modes: Long press the mode button for three seconds to switch among VW(H/N/S) /VT(Ni200, SS, Ti)/ TCR / BYPASS / CCW / CCT modes.

Charging: It is with Quick Charge System and equalizing charge system. Simply plug in the USB cable to charge the battery, OLED display current battery level (0%, 20%, 50%, 80%, and 100%) and the Remaining Charging Time to get the battery fully charge. The Remaining Charging Time will be shown in every 10 minutes. And the display will remain lit while charging.

Firmware update and customizing: Can be updated and customized through a simple software that can be downloaded directly from our website. The software will be made to run on Windows systems and will be available in English. It will also include a “help”sections for urgent questions. The directions on how to use our software will be found on our website and Facebook page.

Adjustment of Air Flow: The top airflow system can be adjusted with slight twisting motions of the top lid which will not loosen its attachment to the pyrex glass.

Filling E-liquid: This easy top-fill tank will only ask of you to screw out the lid and fill in the chamber when the base is securely shut.Be sure to safely position the glass part when this process is
in place to avoid spillage.

Changing Atomizer: Unscrew the base to simply remove and insert a new atomizer whenever needed. Pull the EUC out from the base and insert a new one. Screw the Base on. Wait after replacing to make sure the coil is well primed. Item 10 to 12 only apply to Swag Starter Kit

How to Set the Mode
1) Smart VW mode: As an advanced Variable Wattage mode, there are 3 levels of VW: H stands for High; N stands for Normal; S stands for Soft. The default setting is Normal. VW(H/N/S) will guarantee your mod's ability to skillfully select the adequate average wattage for your atomizer, according to its resistance reading, automatically.

2) In CCW mode: While on VW mode, press the mode button three times consecutively to select CCW. Select and hold down the mode button to confirm and to implement any modifications to
the wattage line using the plus and minus buttons (Ramp up time and consequent performance); move on to the next bar with a quick press of the mode button. When all modifications are final hold pressed the mode button to save and exit.

3) In TC-Ni/TC-Ti/TC-SS/TCR(M1, M2) Mode: When set in TC-Ni/TC-Ti/TC-SS mode, the device can separately support Nickel 200, Titanium, and 316 Stainless Steel coils. The OMNI Board 2.0 allows you to change the start up wattage under temperate control mode. The default wattage is 65W. You could also adjust the value of the coil within the given range. In TCR (Temperature Coefficient of Resistance) mode, the device can support different temperature control coils within different TCR value ranges and you can set the TCR at different values within proper range.

The Setting of TCR Mode (M1,M2):
When set in TC-Ni/TC-Ti/TC-SS mode ,and the device is powered on, you will enter into the TCR (M1,M2) set menu, by clicking mode bottom 3times:
1. Press mode button to choose among M1, M2 ;
2. Press the up or down button to increase or decrease the TCR value according to the material of the coil you used;

Following are different TCR value ranges for different coils for your reference:

Note: 1.The TCR value in the sheet is 10 multiplied of the actual TCR.
2.Our total range of TCR value is 1-1000.

Adjust temperature: In TC-Ni/TC-Ti/TC-SS/TCR(M1,M2) mode, temperature can be adjusted from 100-315℃ or 200-600℉ by pressing up button or down button, up button to increase and down button to decrease. Each press of the up or down button will increase or decrease the temperature setting by 5℃ or 10℉. Long press up button or down button can rapidly increase or decrease temperature setting.

Lock/Unlock resistance: In TC-Ni/TC-Ti/TC-SS/TCR(M1, M2) Mode, press the "-"and mode button simultaneously for 2s will lock/unlock the resistance level, “ ” will appear on the display. Attach a new atomizer will not change the locked resistance. Automatic atomizer recognition: To achieve better temperature control effect, the mod will ask the user if the new atomizer is attached. " OLD LOAD: -, NEW LOAD: + " will appear on the display. If a new atomizer is attached, press " + ", the mod will read new resistance; if not, press " - ", the mod will read at locked resistance.

4) In CCT mode: While on any TC mode, press the mode button three times consecutively to select CCT. Select and hold down the mode button to confirm and to implement any modifications to
the temperature line using the plus and minus buttons (Ramp up time and consequent performance); move on to the next bar with a quick press of the mode button. When all modifications are final hold pressed the mode button to save and exit.

5) In Bypass mode: Direct output voltage system is applied in Bypass mode. The higher the batterylevel is, the higher the output voltage is. When set in this mode, the device can support a coil whose resistance is within the range of 0.05-5ohm.

6) Smart ON/OFF:
As an advanced Variable Wattage mode, Smart VW could be switched on and off on the main manual and it does not impact the VW(H/N/S). Enter Smart ON/OFF and press Yes or NO to confirm.

7) Screen Timeout: The timeout setting could be adjusted from 3 seconds up to 60 minutes. Enter the Screen Timeout and adjust the time up or down as you wish.

8) Default: You could reset to default setting by entering Default and pressing YES.

Vandy Vape Govad RDA Preview

Vandy Vape, formed last year has surprises vapers with many its outstanding atomizers including the Vandy Vape Mesh RTA and the Bonza RDA. However, do you still remember its first releases-the Govad RDAs, a collaboration of a team member from the Geekvape and Vandy Vape. It seems that this release has shock the market. Let's have a look at it.

The Govad RDA comes with a Govad deck which adopts almost the same look as the Hadaly deck. The deck also has two airflow inlets that are placed on the either side of the deck. Apart from the side airflow inlets, it also has two bottom airflow inlets which can heat the coil from the underneath. This offers you more choices and you can choose to use which air inlets and have a different vaping experience.

The spring-loaded clamp system which can be found in many some RTAs has the ability to make the whole building of the Govad deck a piece of cake especially when used with a large single coil. This is also one of the outstanding of this Govad RDA.
The Govad RDA is receiving great popular from vapers of a wide range. With the side airflow inlets as well as the bottom airflow inlets, this RDA can deliver you with satisfying vaping experience simply by adjusting the side port or the bottom slots and you can enjoy a denser flavor experience. It seems that the Govad is best compatible with a single coil. However, if you want to use dual coils, you can also make it come true and you can find this by yourself.

Apart from those extraordinary features, the Govad also has a fashionable looking. We are hoping that Vandy Vape will continue to deliver customers with outstanding atomizers with a reasonable price.

IJOY CAPO SRDA KIT - Your First Squonker Kit

If you want to enter into the world of vaping as well as the world of squonking, an easy-to-build and simple-to-use device is what you need now! IJOY, specializing in making squonk mod, launched its another brand-new squonk mod that is both easy to maintain and operate. Today, we are going to have a look at the IJOY CAPO SRDA kit which is also considered the best entry vape kit for squonkers.

Powered by 20700/18650/21700 battery, the mod is capable of outputting 100W, adequate for your daily use. With the fire button and the Squonk bottle at the same side, you can view the e-liquid level when you are vaping. Equipped with a semi-rebuild system, the CAPO SRDA kit is convenient in exchanging the pre- made coil with rebuild decks, finishing the whole process in no time so that you can enjoy vaping as soon as possible.

There is an innovative pre-made coil, you can use the coil to for several times just by changing the cotton. The squonk bottle is large enough for you to hold 9ml e-liquid and it can satisfy your daily use. What’s more, the squonk bottle is very solid so that it is more durable than any other squonk bottles made of ordinary silicon. It is estimated that the squonk bottle of the CAPO SDRA kit is at least ten times durable than common squonk mod. Apart from so many functions, it is very fashionable with many finishes, always a one you like!

Finally, if you are looking for your first squonk mod or if you want to change squonk mods, the IJOY CAPO SRDA Kit will never let you down!

Vandy Vape Bonza RDA Preview -- Not Only A Visual Feast

Vapers are in the pursuit of incredible vaping experience and enchanting design, so the function and appearance of the vape mod and atomizer are becoming increasingly important or most of the vapers no matter what grade they belong to. As a perfectionist, I am always trying to find the best. Also as a vaper, I am greatly satisfied the newest RDA from Vandy vape called Bonza RDA.

Why does it so appealing to me? Now I am going to give you my answers and I am sure you will love it as much as I do after having a clear knowledge of it. It is a partnership between Vandy Vape and The Vaping Bogan, an Australian YouTube reviewer, famous for his YouTube Videos. It is him who integrated his personal vaping style into the design of it. Therefore, it is a considerate vape.

Let's begin with its appearance. The vaping Bogan's skull-and-crossbones logo really impresses me. Holding it in my hand makes me look even cool. What’s more, the choice of color is also a great plus with colorful drip tips for added pizzazz. It is indeed a visual feast. As for its functions, Featuring a 24mm diameter and 25.5mm top cap, it is compatible with most of the vape mods. In addition, the RDA 100% suitable for the Squonk mod with a bottom feeding pin. Besides, the adaption of the uniquely fixed screw-clamp deck configuration is also an innovative move. Other features like the centered dual layout and the 2ml e-juice well all ensures that you can have an easy building and the improved flavor. In conclusion, this Bonza RDA really surprises you!

How to Choose a Proper Atomizer?

We gave some simple introduction to the features of one of the important part of e-cigarette. After posting it on platforms, we received many messages from new hands and those who ready to use e-cigarettes. They showed their admiration to our column. Of course, such concept seems simple for experienced players. But we still want to introduce some basic knowledge of e-cigarettes in the beginning and then go deeply gradually after comprehensive consideration. Our column launched just now. Thank everyone for your support to the column of vaping and hope you can continue to encourage us.

In previous columns, we talked about tobacco oil and main body. We will introduce atomizer in this column. The atomizer of e-cigarettes is a heating element. Powered by batteries, it can heal and atomize inner oil to produce smoke. Therefore, we can achieve the effect of "blowing smoke" when we smoke e-cigarettes. Nowadays, the atomizer can be divided into smoke cartridge (simulating traditional cigarettes), atomizer with oil storage and atomizer of oil drip. Its quality depends on its materials, healing core and making process. Today we mainly talk about the features of "oil storage" and "oil drip" so that you can choose a more suitable device for yourselves.

The atomizer of oil storage can roughly be divided into finished atomizer and DIY atomizer. It has a storage device so users can smoke continuously. It is the common choice for ordinary players.

1. Finished atomizer with oil storage
Finished atomizer means finished atomizing core. Its advantage is convenient using. We can change the atomizing core directly. Its disadvantage is high cost of using the core. One core usually costs about 4 or 5 USD. In general, we need to change our core once a week. If your using frequency is high-cost or the soot deposits into oil are more serious, the using time will be much reduced. Finished atomizer is suitable for new hands and those who have no time or are rich enough to spend a large sum of money on it.

2. DIY atomizer with oil storage
DIY, as the name implies, means we do it by ourselves. It is distinguishable from finished atomizer mainly because its atomizing core can be made by yourselves so it has a lower cost and more ways of playing. DIY atomizer can be separated into the inner storage and outer storage. The former one belongs to atomizing storage, where atomizing core works. The outer storage is for storing oil. In general, a full oil can ensure that you don't need to add oil in a day. There is an oil drain between inner storage and outer storage, which guides oil to the atomizing core by guiding-oil cotton. We will introduce how to make atomizing cores briefly in the latter columns. DIY atomizer can be divided into "flavor reference" and "smoke reference". DIY atomizer is suitable for experienced players.

Atomizer of oil drip output in a way of low resistance and high power. The low resistance can produce much heat energy in a short time to atomize lots of oil and produce big smoke. We can drop tobacco oil into the cotton on the healing core, which is the most efficient and quick way of guiding oil. So it is the favorable choice of senior players.

3. Atomizer of oil drip
Atomizer of oil drip has no oil storage. It just has an atomizing bin. While using it, we need to drop several drips of oil into the cotton and then we can smoke. After several smokes, we need add oil again. It usually has more than one electrode posts, which can be single and multiple. Without oil storage, there is a bigger space for making atomizing core. So players’ imagination can be fully developed.  Its low resistance and big smoke make it more suitable for smoke-show players and senior players.

Nowadays, there are also some atomizer with oil drip and storage and finished and DIY ones, none of them is the main current in the market. However, such atomizers provide more choices for players.

The above is what I want to share with you. Your messages and criticisms are welcomed. You can share your using experience with others. In next column, we will integrate whether e-cigarettes is harmless or not from the technical angel after synthesizing a few senior players' viewpoints. Let us play e-cigarettes together happily. Please look forward!

Wismec Neutron Quick Guide

How to use?
1. Two kinds of atomizer base are available, one for coils in series and the other for coils in parallel. The users then can fix the pre-made or self-built coil with cotton. After fixing, cut down the spare coils.
2. Drip a few drops of e-juice directly into the coil and cotton to make them fully saturated before use.
3. Put the airflow control ring on the tank, and then put the top cap on.
4. Put the completed upper part on the atomizer base and then the whole atomizer is assembled.

How to fill E-liquid?
Unplug the top cap and drip some e-liquid into the juice wells directly. After filling, fit on the top cap again.

How to adjust airflow?
By rotating the top airflow control ring clockwise or counterclockwise, you can adjust the airflow and get different vaping experiences.

Eleaf iJust 2 TC Atomizer User Manual

How to assemble
1.First mount the EC TC head onto the atomizer base;
2.Then put together atomizer base, atomizer tube and mouthpiece;
3.Finally assemble iJust 2 TC atomizer and temperature control battery together.

How to add liquid
1.First unscrew the atomizer base off the iJust 2 TC atomizer;
2.Then slowly refill the liquid into the hole along the atomizer tube;
3.Finally screw the atomizer base onto the iJust 2 TC atomizer again.
(Note: Please don’t add liquid into the air pipe and don’t overfill.)

How to adjust airflow
Put the silicone airflow control ring on the atomizer base. Then the amount of airflow can be adjusted by rotating the silicone airflow control ring so as to get different vaping experience.

Precautions 

1. Only have your iJust 2 TC atomizer repaired by Eleaf. Do not attempt to repair the unit by yourself as damage or personal injury may occur. 

2.Do not leave the iJust 2 TC atomizer in high temperatures or damp conditions,otherwise it may be damaged. The appropriate operation temperature is within -10℃ to 60℃ while using. 

3.Do not attempt to combine the iJust 2 TC atomizer with parts from other brands of e-cigarettes. If it is damaged in this way, our company will not take on responsibility and your warranty will be void.

Softwares for Eleaf iKonn 220

New firmware V1.06 made the following 3 upgrades for Eleaf iKonn 220:
1. Detecting resistance of coil in sleeping state;
2. Lowering the voltage value of “weak battery”;
3. Making preheat function visible.
Finally, download the file to upgrade your Eleaf iKonn 220 to V1.06.

NICOMORE M1 RDTA&RDA Luanching

This September, NICOMORE M1 comes to market with its innovative designs. The manufacture, NICOMORE, has long been at their best to create top pop atomizer catering to users' needs. At this launch, NICOMORE sacrifices no features. Instead, it squeezes in some new ones. Here is why NICOMORE becomes popular.

NICOMORE M1, comes with a height of 44.4 mm and a diameter of 24 mm. It weighs 55 g. This product is small but well built. The e-liquid volume is 1.5 ml. It is not a big one comparing with other vapes. The unique color of NICOMORE is classic black. Simple though it is, NICOMORE looks luxurious and delivers a high profile.

Users can fix coils by adjusting a particular system inside. What’s more, the electrodes deck is unique as well whose insulator is made of ceramic material. The ceramic material greatly protects atomizer from short circuit and also provides a high heat resistance. There is a liner inside the cover as well. It is made of peek that works well in terms of heat insulating.

Both RDTA and RDA are available on NICOMORE. Switching between the two modes is very convenient. This is one of the highlights of this product. Twisting the bottom to refill e-liquid does reduces the possibility of leaking oil. The position of air intake system adopts a concealed design, which makes the exterior more cool.

At present, NICOMORE has entered European market. Its initiative design with fixed fused coil is also getting popular on the other markets. NICOMORE is always trying to create product of rich feature. With an appealing outward appearance, the sophisticated technology, and the innovative design of structure, NICOMORE M1 will bring you special vapor and enjoyable flavor. Its features are quite enough for users’ needs, especially for those who want large clouds or enjoy DIY.