Geekvape GBOX Squonker Mod

   The GBOX Squonker is a dual-chip host, which is a good news for players with  mechanical doubts. Although the weight and size increase, the relative endurance is also enhanced than that of the single-chip host. And the pressure regulation, temperature control, taste curve and straight through mode are indispensable.
   The Radar analysis of the genus is both concentrated type and smoky type. In order to adapt to the bottom injection system, non pole column design of high type is adopted by the frame, which makes it have enough storage space to avoid oil spill. And the coil set and order also bring  enough convenience. The end of the screen space are two batteries, while the other side is the bottle. The keys and the USB port is the common configuration on the upper, middle and lower. The pure weight of the GBOX Squonker Mod is about 220g, and the length and width of it is 88*56mm, the thickness of the egg type is the thickness at 44mm. The black red adjustment color of the GBOX Squonker Mod is very introverted. The uniform color, once again fell the excellent work of GeekVape. The USB link of the dual mobile phone system is a inspiring design for the players who like the machine. The ByPass model can better reflect the advantage of the dual power, while the VPC model has wider play-ability.
 

Geekvape Medusa Reborn Atomizer

   The Geekvape Medusa Reborn Atomizer looks like a small bottle,and it has four color options: SS color,rainbow, blue and black. The size is only 47mm*25mm and the weight is 130g. you can carry it effortlessly due to the slim and compact profile.
   The Medusa Reborn Atomizer has both 3.5ml tank capacity and 2ml tank capacity, you can choose one according to your demand. Equipped with 810 drip tip and 510 drip tip, you can use your own one. The Medusa Reborn Atomizer is compatible with both regulated mod and mechanical mod, which makes you have more choice. The maze coils are different from traditional sub ohm coils, which use more durable materials, with better safety and availability. The Medusa Reborn Atomizer is rebuildable, you can clean it more easy and convenient. The gold-plated bottom feeding pin will give you a satisfied vaping experience. Equipped with the Quick Access System, optimized build desk and optimized fill port, the vapers will refill and build coil easier than before.
 

iStick Kiya kit 1600mAh Mod With 2ml GS Juni

   The iStick Kiya with GS Juni has three colors: silver, greenery and black. It is made up with a GS Juni atomizer, a QC USB cable, a GS air 1.5ohm head, a GS air 0.75ohm head and a iStick Kiya battery mod. The size of the iStick Kiya is 35.5mm*25.8mm*94.5mm and the weight is 115.4g, you can carry it effortlessly.
   There is a large 1.45 inch screen with rich color displayed, you can view all the important information even while vaping. The iStick Kiya adopts the temperature protected charging system and 2A charging current, so that the charging process is faster and safer. The iStick Kiya comes with a refined airflow system and the GS Juni atomizer with the optimized GS Air coils , so that you can enjoy a pleasant and great vaping experience with enhanced taste. The iStick Kiya can fire up to a maximum output of 30 watts, and there are three modes available for you to choose: VW mode, Bypass mode and TC mode. The fire key is very big and it is designed on the right of the battery mod.

General Operations of Eleaf iStick Pico 21700 Box Mod

1. Select vaping mode: when the device is powered on, you’re free to switch the vaping modes among VW, Bypass, TC-Ni, TC-Ti, TC-SS316, TCR-M1, TCR-M2 and TCR-M3 by repeating 3 quick clicks of the fire button.

Adjust wattage: in VW mode, the wattage can be adjusted by pressing +/- button. Keep holding +/- button to increase/decrease the wattage rapidly. In TC (Ni, Ti, SS, TCR-M1/M2/M3) mode, first press the fire button 4 times in quick succession and then press +/- button to adjust the wattage.

Adjust temperature: in TC (Ni, Ti, SS, TCR-M1/M2/M3) mode, simply press +/- button to increase/decrease the temperature setting.

2. Other settings: press the fire button and + button simultaneously to enter set menu, and you’ll be able to lock/unlock coil in TC modes, set stealth on/off, choose a parameter to be displayed on main interface, turn on/off custom logo, check battery status and firmware/hardware version of the device, activate/deactivate preheat function in VW mode and set TCR value in TCR (M1/M2/M3) mode simply by pressing +/- button to move or adjust and pressing fire button once to confirm your choice. After settings are complete, just move to EXIT and click fire button once to confirm and go back to the main interface.