Header Ads

Aspire Pegasus

The Dimensions:45mm*91mm ; Floating loaded 510 connection
0.86 inch LED display ; Compatible with:18650 battery(battery not included)

Pirce:  $66.9   $88.9



Order Now


Introducing the Pegasus TC manual edition. The Pegasus delivers power up to 70 watts in REG mode with temperature control in a sleek and classy device that fits comfortably in the palm of your hand. The manual edition delivers the same functionality as the original Pegasus but with all the settings defined by the user. It supports Kanthal, Nickel, and Titanium atomizers.

Specifications

MOD Size (height*width): 91 x 45mm
Wattage Output: 1.0W-70W(in REG mode)
Resistance Parameters: 0.1ohm-3.0ohm(in REG mode) 0.2ohm-3.0ohm(in BYPASS mode)
Voltage Output: 0.50V-8.50V
Color: Brushed Brass, Brushed Slate and Brushed Chrome
Materials: stainless steel, Pyrex tube, Japanese organic cotton

Features:

1.Pressing the fire button for at least 4 seconds, will cause the Pegasus mod to read the material of the coil automatically and change the mode between normal and temperature control. (Note: 1.When attaching a new atomizer please be sure that the display is illuminated 2.if the battery is below half a charge, 3.6 volts, the Pegasus may take longer to switch modes.)
2.The Pegasus provides the full 70 watts to regulate temperature
3.To increase the temperature turn the gear to the left, to descrease the temperature turn the gear to the right.
4.To increase the wattage turn the gear to the left, to descrease the wattage turn the gear to the right. If you turn the gear quickly the wattage will be increased or decreased in 10 watt increments.

Display

• Voltage displayed to the hundredths
• Resistance displayed to the hundredths
• Wattage displayed in large easy to read numerals

Protective features
• No atomizer message
• Stepdown protection
• High temperature protection
• Short circuit /Low resistance protection
• Automatic cutoffn

REG/BYPASS mode
If “Ka” (Kanthal, standard wattage mode) is selected the next screen will allow you to switch between Bypass (Direct current from the battery to the atomizer. You will not be able to change the wattage in this mode) or Regulated (The current is controlled by the cpu in the device, Wattage may now be adjusted via the gear, left to decrease and right to increase.). Note that Stainless steel and nichrome can also be used under the “Ka” settings.

Temperature control(viable with Nickel and titanium coils)
1.If “Ni” or “Ti” (Nickel or Titanium, temperature control mode) are selected you will be prompted to select between “F” (Fahrenheit) or “C” (Celsius) accompanied by the return arrow.
2.The device will then read “ROOM TEMP”. Selecing “YES” will lock the resistance of your atomizer. (Environmental temperatures can impact the resistance of temperature control coils This feature allows the user to have a consistent vape every time.) Selecting “NO” will cause the device to use the old resistance as the baseline for calculating temperatures. Temperature may now be adjusted via the gear, left to decrease and right to increase. Both options will require confirmation upon selection.
3.The pegasus allows for temperature from 200 to 600 Fahrenheit or 100 to 315 Celsius.

Aspire Pegasus Mod Includes:

1 X Pegasus Box MOD 1 X Aspire micro USB cable 1 X User manual

Shopping Guide:

Buy it at Aspire Official Site [http://www.aspirecig.com] with $70.00, Buy it at Aspire official authorized distributor online store [http://www.aspirepegasus.org] with $66.90. They are both 100% authentic, and both with best after-sales service, if you have any questions, you can contact them with their facebook page, there are someone would help you as soon as possible!

No comments

Powered by Blogger.