iCare 140 User Manual
Notice for Use
Thank you for choosing Eleaf products! Please read this manual carefully before use so as to use correctly. If you require additional information or have questions about the product or its use, please consult your local agents, or visit our website at www.eleafworld.com.
Product Introduction
The iCare 140 is a new easy-to-use starter kit with an inbuilt tank by Eleaf. It features the spiral mouthpiece design for a more flavorful vortex of vapor. The e-liquid can easily be refilled by removing the top cap and its side USB port is for convenient charging. In addition to the elegant looking, the Eleaf iCare 140 Kit is available in various attractive colors for your choice.
How to Use?
Assembling:
a) How to assemble:
Screw the IC 1.1ohm Head onto the top cap tightly and then you can screw the top cap with atomizer head into the tank.
b) How to fill e-liquid:
1. First unscrew the top cap off the tank;
2. Then slowly refill the e-liquid into the tank;
3. Finally screw the top cap with atomizer head into the tank again.
Note:
1. Please don’t fill beyond the Max mark to avoid overflow.
2. Please first drip a few drops of e-liquid directly into the coil to make it fully saturated before first use.
Power on/off:
Press the button 5 times in quick succession within 1.5 seconds, the white button light will flash 3 times to show the iCare 140 is ready to use. In the same way, the iCare 140 can also be turned off.
Vaping:
When the device is powered on, you can long press the button to take a puff.
Charging:
Charge the iCare 140 by connecting it with 0.5A wall adapter or computer via USB cable. The white button light turns on when the device is charging. When the device is fully charged, the light flashes 20 times and then goes out.
Properties and Protections:
Atomizer Protection: Each time when vaping time exceeds 10 seconds, the button light flashes 8 times and the output cuts off automatically.
Short Circuit Protection: If short circuit occurs before vaping, the button light will flash 3 times quickly and the output cuts off automatically when you start to vape; if short circuit occurs during vaping, the button light will flash 3 times slowly.
Low Voltage Protection: When the voltage of the device is lower than 3.3V, the button light flashes 10 times and there will be no output. Charge the device to reactivate it.
Resistance Detect: If the output load resistance is lower than 1.0ohm, there will be no output when you press the button to vape.
Warranty
We are not responsible for any damages caused by human error. Legal warranty is applied.
Warnings
1. Please keep out of reach of children.
2. This product is not recommended for use by young people, non-smokers, pregnant or breast-feeding women, or persons who are allergic/sensitive to nicotine.
Contra-indication
1. Do not attempt to repair the product by yourself as damage or personal injury may occur.
2. Do not leave the product in high temperature or damp conditions, otherwise it may be damaged.
3. Do not use this product for other purposes except only for vaping and don’t swallow the e-liquid.
Possible Adverse Effects
1. This product may be hazardous to health and contains nicotine which is addictive.
2. For people with adverse reaction after using this product, it is recommended to use the e-liquid with lower nicotine content or no nicotine.
Thank you for choosing Eleaf products! Please read this manual carefully before use so as to use correctly. If you require additional information or have questions about the product or its use, please consult your local agents, or visit our website at www.eleafworld.com.
Product Introduction
The iCare 140 is a new easy-to-use starter kit with an inbuilt tank by Eleaf. It features the spiral mouthpiece design for a more flavorful vortex of vapor. The e-liquid can easily be refilled by removing the top cap and its side USB port is for convenient charging. In addition to the elegant looking, the Eleaf iCare 140 Kit is available in various attractive colors for your choice.
How to Use?
Assembling:
a) How to assemble:
Screw the IC 1.1ohm Head onto the top cap tightly and then you can screw the top cap with atomizer head into the tank.
b) How to fill e-liquid:
1. First unscrew the top cap off the tank;
2. Then slowly refill the e-liquid into the tank;
3. Finally screw the top cap with atomizer head into the tank again.
Note:
1. Please don’t fill beyond the Max mark to avoid overflow.
2. Please first drip a few drops of e-liquid directly into the coil to make it fully saturated before first use.
Power on/off:
Press the button 5 times in quick succession within 1.5 seconds, the white button light will flash 3 times to show the iCare 140 is ready to use. In the same way, the iCare 140 can also be turned off.
Vaping:
When the device is powered on, you can long press the button to take a puff.
Charging:
Charge the iCare 140 by connecting it with 0.5A wall adapter or computer via USB cable. The white button light turns on when the device is charging. When the device is fully charged, the light flashes 20 times and then goes out.
Properties and Protections:
Atomizer Protection: Each time when vaping time exceeds 10 seconds, the button light flashes 8 times and the output cuts off automatically.
Short Circuit Protection: If short circuit occurs before vaping, the button light will flash 3 times quickly and the output cuts off automatically when you start to vape; if short circuit occurs during vaping, the button light will flash 3 times slowly.
Low Voltage Protection: When the voltage of the device is lower than 3.3V, the button light flashes 10 times and there will be no output. Charge the device to reactivate it.
Resistance Detect: If the output load resistance is lower than 1.0ohm, there will be no output when you press the button to vape.
Warranty
We are not responsible for any damages caused by human error. Legal warranty is applied.
Warnings
1. Please keep out of reach of children.
2. This product is not recommended for use by young people, non-smokers, pregnant or breast-feeding women, or persons who are allergic/sensitive to nicotine.
Contra-indication
1. Do not attempt to repair the product by yourself as damage or personal injury may occur.
2. Do not leave the product in high temperature or damp conditions, otherwise it may be damaged.
3. Do not use this product for other purposes except only for vaping and don’t swallow the e-liquid.
Possible Adverse Effects
1. This product may be hazardous to health and contains nicotine which is addictive.
2. For people with adverse reaction after using this product, it is recommended to use the e-liquid with lower nicotine content or no nicotine.
.jpg)
%20MTL%20RTA%E6%A8%AA%E5%B9%85.jpg)
No comments