What Should I Do If IStick TC100W Firmware Update Error Cccurs?
Many friends who purchased iStick TC100W mod have encountered problems after firmware upgrade, so today I will share with you the solution to the common problems of firmware upgrade.
A: Please first change another computer and USB cable to have a try.
Please take out batteries from the device, press down the up button without looseness and at the same time connect device with PC via USB cable to have a try again.
A: Please take the battery cell and atomizer from you device first and them do upgrade process.
If this way still doesn't work, please try:
1, connect the USB Cable with your PC first and open the upgrade program
2, keep pressing the "+" button of your iStick TC100W, then plug the USB port
3, Update
A:The actual output of the iStick TC100W is restricted by three theoretic parameters: maximum current 25A, maximum voltage 10V, maimum power 100W(120W after updating the software).
According to these formulas: P=U2/R (P:power, U:voltage, R:resistance)
P=I2*R
When the resistance is 0.15ohm, it will be restricted by maximum current 25A.
The actual maximum power: P=I2*R=25*25*0.15=93.75W
When the resistance is equal or greater than 0.19ohm, it can reach to 120w.
When the resistance is less than or equal to 0.19ohm, it can't reach to 120w.
1. Why my iStick TC100W can't be upgraded?
A: Please first change another computer and USB cable to have a try.
Please take out batteries from the device, press down the up button without looseness and at the same time connect device with PC via USB cable to have a try again.
2. My iStick TC100W has no response after upgraded.
A: Please take the battery cell and atomizer from you device first and them do upgrade process.
If this way still doesn't work, please try:
1, connect the USB Cable with your PC first and open the upgrade program
2, keep pressing the "+" button of your iStick TC100W, then plug the USB port
3, Update
3. Why my iStickTC100w can't reach 100W or 120W after upgraded?
A:The actual output of the iStick TC100W is restricted by three theoretic parameters: maximum current 25A, maximum voltage 10V, maimum power 100W(120W after updating the software).
According to these formulas: P=U2/R (P:power, U:voltage, R:resistance)
P=I2*R
When the resistance is 0.15ohm, it will be restricted by maximum current 25A.
The actual maximum power: P=I2*R=25*25*0.15=93.75W
When the resistance is equal or greater than 0.19ohm, it can reach to 120w.
When the resistance is less than or equal to 0.19ohm, it can't reach to 120w.
No comments