Wismec Presa User Manual

Presa is inspired by an ergonomically sculpted design to fit your hand. The anlarged fire button was designed so you can comfortably grip the device in many different ways. It is modern in appearance with an aesthetically pleasing design.

Other features include:
Enhanced manual safely lock switch
Temperature protection feature
OLED display
510 spring loaded connector
40W/ 10V with 2600mAh battery capacity

How to Use
Power on/ off: Clicking button 5 times continuously will turn device on/ off. To use, press and hold button down while in use. Let go of the button when done.

Adjust the Wattage/ Voltage: Press up / down adjustment button to increase/ decrease the wattage/ voltage.

Switch the VV/ VW Mode: Clicking fire button 3 times continuously to switch between VV/ VW mode. In VV mode, you can adjust output voltage between 2.0V-10.0V. In VW mode, you can adjust output wattage between 5W-40W.

Safety Lock Switch: Mode the lock switch right/ left to lock/ unlock the fire button so that unintentional press could be avoided.

Switch the Display Mode: By holding the up/ down adjustment buttons simultaneously for 2 seconds when the battery is off, the screen display will rotate 180 degrees. You can then view the screen from two kinds of angle through this operation.

How to Charge
The Presa is charged via tail USB port. It will take about 3-3.5hours to fully charge the battery with 1A charger. The battery power symbol on OLED screen will keep slowly flashing during charging and go out when the battery is fully charged.