Header Ads

Wismec RX mini Kit User Manual

What functions dose RX mini Kit have?
1. Key lock function: While the device is on, simultaneously press the two regulatory buttons. This will switch between Key Lock and Key Unlock function.

2. Micro USB Port function: The USB port can be used for charging and upgrading firmware.

3. Resistance locked function: While the resistance sign blink, press the right regulatory button to lock or unlock the resistance of the atomizer. (Note: Such operation should be carried out at room temperature.)



How to use it?
1. Power on/off: Press the fire button 5 times in quick succession to turn the device on and off.
(Note: Please adjust the wattage to a proper range to match the atomizer you used before using.)
2. Stealth function: While the device is on, simultaneously hold the fire button and the left regulatory button. This will switch the screen display on and off.

3. Switch the display mode: By pressing the left and right regulatory buttons simultaneously in shutdown state, the screen display will rotate 180 degrees. You can then view the screen from two kinds of angle through this operation.

4. Shift among VW/Bypass/TC-Ni/TC-Ti/TC-SS/TCR Mode
Press the fire button 5 times to turn the Wismec RX mini Kit on. The OLED screen presents 4 rows of information:
(1). Mode (VW, Bypass, TC-Ni, TC-Ti, TC-SS, TCR) and Battery indicator
(2). Temperature in TC modes or Output wattage in VW/Bypass mode.
(3). Output wattage in TC modes or Voltage in VW/Bypass mode.
(4). User information (Current, Puff, Time) and Resistance

5. Vaping: When the device is powered on, long press the button to take a puff.

6. How to Reset: If you get stuck while upgrading, just press the right regulatory button and then insert into the reset hole with a needle to restart.

No comments

Powered by Blogger.